Operating the Equipment Locally
Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder Page 4-49
ST.TM.E10076.3
Table 4.43: VBI - Line ‘n’ Options
Option Description
Frame Rate = 29.97 Hz
Off VBI data is not extracted from the line.
Vertical Interval Time Code VITC data extracted from the line.
Video Index
Closed Caption The setting cannot be selected on this screen, but is set by setting the Closed Caption
option to On. It indicates that closed captioning data is extracted from the line. Setting Line
21 back to Off or VITC resets the Closed Caption option back to Off.
Neilsen AMOL 1 Neilsen AMOL 1 data is extracted from the line.
Neilsen AMOL 11 Neilsen AMOL 11 data is extracted from the line.
Frame Rate = 25 Hz
Off VBI data is not extracted from the line.
Vertical Interval Time Code VITC data extracted from the line.
Video Index Aspect ratio will be affected (see 525 line – with AFD set to On, lines 14 and 277 will be set
to Video Index.
Table 4.37).
Teletext System B
(World System Teletext)
Teletext System B data extracted from the line.
Inverted Teletext Inverted Teletext is extracted from the line.
Wide Screen Signalling The setting cannot be selected on this screen, but is set by setting the WSS (Line 23) option
to On. It indicates that WSS data is extracted from the line. Setting Line 23 back to Off,
VITC or Teletext System B resets the WSS (Line 23) option back to Off.
Closed Caption Closed Caption data is extracted from the line.
Video Programming System The setting cannot be selected on this screen, but is set by setting the VPS (Line 16) option
to On. It indicates that VPS data is extracted from the line. Setting Line 16 back to Off, VITC
or Teletext System B resets the VPS (Line 16) option back to Off.
When operating in ATSC mode and Closed Captions, the language of the
descriptors is set by the Encoder.
When switching the Encoder from DVB to ATSC mode the PIDs are
remapped. The remapping would be specified by the program paradigm.
Switching back to DVB would invoke the original PIDs.