Filter
Top Products
Creating and Downloading a Logo
Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder Page E-13
ST.TM.E10076.3
E.8 Fault-finding
If there appears to be a problem creating or downloading a logo check the
following:
· If the Communications box reads "Error Creating Socket", there may
be a problem with the PC's network set-up, or another application may
be using the TFTP socket number.
· If the Communications box reads "Waiting For Response" for a long
time, the target Encoder is either busy or not visible on the network.
Abort the transfer before changing the IP address.
· Large images take time to appear due to network transfer rates and
image processing.
· If the download completes, but the OSD image does not appear on
video, the image may be too near the edge of the screen – try moving
it towards the centre. Make sure the correct line standard is selected.
· Make sure the image is visible on a typical domestic television. Make a
note of the co-ordinates where the image is required.
· If precise timing is required, Download the image in advance with
Auto Show off, then click Show when display is required.
· To move the current Region, reposition the white cursor, check that
the OSD File box has the correct image, and click Download.