TANDBERG E5714 Flat Panel Television User Manual


 
Options and Upgrades
Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder Page 3-21
ST.TM.E10076.3
3.8 SD Decoder Option (M2/EOM2/DEC)
3.8.1 Overview
NOTES…
1. The M2/EOM2/DEC SD Decoder Option is supported by Build version 3.1 and later.
2. This option module only fits into option slot 6 in the E5740, and must always be accompanied by
a demodulator option module in slot 5.
This option module is a complete MPEG-2 standard definition decoder,
capable of decoding 422P@ML and MP@ML. It can provide analogue or
digital video and audio outputs, as well as synchronous and asynchronous
data outputs. In conjunction with a demodulator option module, it provides
a complete satellite monitoring receiver within the E5740 Encoder.
3.8.2 Assembly
Rear Panel
ASI Out
A 75 W female BNC connector provides an ASI
output of the transport stream being decoded by
the SD Decoder.
Table 3.13: ASI Out Connector
Item Specification
Connector Type 75 W BNC Female
Connector designation ASI Out
Pin-outs Centre Signal
Screen Ground
SDI Video Out
A 75 W female BNC connector provides an SDI video
output that conforms to ITU-R BT.656.
Table 3.14: SDI Video Out Connector
Item Specification
Connector Type 75 W BNC Female
Connector designation SDI Out
Pin-outs Centre Signal
Screen Ground