TANDBERG E5714 Flat Panel Television User Manual


 
Band Plans
Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder Page F-3
ST.TM.E10076.3
F.1 Channels and Centre Frequencies
The Output Menu has options called Band Plan and Channel (see
Chapter 4, Operating the Equipment Locally).
Once a country has been selected in the Band Plan option then the
required channel should be selected in the Channel option. Each channel
number corresponds to a particular frequency.
NOTE…
Only those frequencies associated with a channel number can be selected.
This Annex contains the channel IDs and centre frequencies for the band
plans in the Output Menu.
If the Manual band plan option is selected then the required frequency
must be selected manually.
Table F.1: Australia
UHF
Channel
Centre
Frequency
in MHz
UHF
Channel
Centre
Frequency
in MHz
UHF
Channel
Centre
Frequency
in MHz
0 48.500 32 557.500 52 697.500
1 59.500 33 564.500 53 704.500
2 66.500 34 571.500 54 711.500
3 88.00 35 578.500 55 718.500
4 97.500 36 585.500 56 725.500
5 104.500 37 592.500 57 732.500
5A 140.500 38 599.500 58 739.500
6 177.500 39 606.500 59 746.500
7 184.500 40 613.500 60 753.500
8 191.500 41 620.500 61 760.500
9 198.500 42 627.500 62 767.500
9A 205.500 43 634.500 63 774.500
10 212.500 44 641.500 64 781.500
11 219.500 45 648.500 65 788.500
12 226.500 46 655.500 66 795.500
27 523.500 47 662.500 67 802.500
28 529.500 48 669.500 68 809.500
29 536.500 49 676.500 69 816.500
30 543.500 50 683.500
31 550.500 51 690.500