Filter
Top Products
TTIMe
Query :TTIMe?
The TTIMe query returns values representing the absolute intermodule
trigger time for all of the modules in the Intermodule configuration. The first
value is the trigger time for the module in slot A, the second value is for the
module in slot B, the third value is for slot C, etc.
The value 9.9E37 is returned when:
•
The module in the corresponding slot is not time correlated; or
•
A time correlatable module did not trigger.
The trigger times returned by this command have already been offset by the
INTermodule:SKEW values and internal hardware skews (INTermodule:HTIMe).
Returned Format
[:INTermodule:TTIMe]
<value_1>,<value_2>,<value_3>,<value_4>,<value_5><NL>
<value_1> Trigger time for module in slot A (real number)
<value_2> Trigger time for module in slot B (real number)
<value_3> Trigger time for module in slot C (real number)
..
. NOT USED .
..
<value_10) Trigger time for module in slot J (real number)
Example OUTPUT XXX;":INTERMODULE:TTIME?"
INTermodule Subsystem
TTIMe
12–10