Filter
Top Products
<delay_value>
real number between −2500 s and +2500 s
Example
OUTPUT XXX;":MACHINE1:TWAVEFORM:DELAY 100E−6"
Query :MACHine{1|2}:TWAVeform:DELay?
The DELay query returns the current time offset (delay) value from the
trigger.
Returned Format [:MACHine{1|2}:TWAVeform:DELay] <delay_value><NL>
Example OUTPUT XXX;":MACHINE1:TWAVEFORM:DELAY?"
INSert
Command :MACHine{1|2}:TWAVeform:INSert [<module_spec>,]
<label_name>[,{<bit_id>|OVERlay|ALL}]
The INSert command allows you to add waveforms to the state waveform
display. Waveforms are added from top to bottom on the screen. When 96
waveforms are present, inserting additional waveforms replaces the last
waveform. Bit numbers are zero based, so a label with 8 bits is referenced as
bits 0 through 7. Specifying OVERlay causes a composite waveform display
of all bits or channels for the specified label. If you do not specify the third
parameter, ALL is assumed.
<module_spec> {1|2|3|4|5|6|7|8|9|10} 2 through 10 unused.
<label_name> string of up to 6 alphanumeric characters
<bit_id> integer from 0 to 31
Example OUTPUT XXX;":MACHINE1:TWAVEFORM:INSERT 1, ’WAVE’,10"
TWAVeform Subsystem
INSert
23–10