Filter
Top Products
Beep Codes and Error Messages 3-7
System CMOS
checksum
bad - Run
Setup
The CMOS configu-
ration data is cor-
rupted.
Run the System Setup
program to restore the
system configuration
information. Also
check to make sure
the battery is
installed correctly.
System con-
figuration
data write
error
A chip on the sys-
tem board may be
malfunctioning.
Run the System Set
Test Group. A faulty
chip on the system
board usually requires
that you replace the
system board.
Table 3-2. System Error Messages
(continued)
Message Cause Action