Filter
Top Products
Removing and Replacing Parts 4-3
1. Turn the selected cover’s keylock on the back panel of the computer to
the unlocked position
(see Figure 4-2)
.
Figure 4-2. Keylocks on Computer’s Back Panel
2. Loosen the three screws along the back edge of the selected cover (see
Figure 4-1).
3. Slide the cover toward the back of the computer an inch or so. Then
grasp the top of the cover at both ends, and lift it straight away from the
chassis.
Repeat the procedure to remove the remaining cover.
keylocks (2)