Filter
Top Products
4-20 Dell PowerEdge 4200 Systems Service Manual
Figure 4-19. Expansion Card Connector Locations
1. Disconnect any cables connected to the expansion card.
2. Remove the retaining screw from the card-mounting bracket.
3. If the card is a full-length expansion card, unlock the locking cam on
the locking card guide.
4. Grasp the expansion card by its corners, and carefully remove it from
the expansion-card connector.
5. If you are not reinstalling an expansion card, install a metal filler
bracket over the empty card slot opening.
EISA
expansion-card
connectors
(EISA1–EISA3)
PCI expansion-
card connectors
(PCI4–PCI8)