Filter
Top Products
107
[Operation Locked: (5XX1)] is dis-
played.
[Normal Recording in Progress:
(5XX2)] is displayed.
[Timer Recording in Progress:
(5XX3)] is displayed.
[Timer Sensor Recording in
Progress: (5XX4)] is displayed.
[Alarm Recording in Progress:
(5XX5)] is displayed.
[Sensor Recording: (5XX6)] is dis-
played.
[Onscreen/Menu Control: (5XX7)]
is displayed.
[Timer Mode Standby: (5XX8)] is
displayed.
[Video Playback in Progress:
(5XX9)] is displayed.
Unable to gain access by entering
the specified URL at the browser.
[Warning: Disable JavaScript in
your web browser] is displayed.
[Authorization Required] is dis-
played.
User name and password are re-
quested when [CONFIGURATION]
and [TIMER RECORDING] are se-
lected.
Password for Administrator rights
forgotten and menu screen for Web
browser operation cannot be dis-
played.
[Timer Mode Standby cannot be
activated] is displayed.
VR-716 is currently in the Normal
Recording mode after the timer is
released and operation via the Web
browser is not possible.
Daily mode in the Weekly Timer
cannot be selected.
New programs cannot be added to
the Weekly Timer/Date Timer
[***: (4xxx)] is displayed.
[***: (xxxx)] is displayed.
[SYSTEM ERROR (E_xx): ***] is
displayed.
Unable to view file list although the
Browseable item in Share File
Setup has been enabled.
Operation of VR-716 via the network is prohibited.
Normal recording is executed at VR-716.
Timer recording using the Program Timer is executed
at VR-716.
Sensor recording is executed while in the Timer
Recording mode at VR-716.
Alarm recording is executed at VR-716.
Sensor recording is executed at VR-716.
Onscreen/Menu displayed at VR-716.
Program Timer is in the Standby mode.
VR-716 is currently playing back recorded images
files.
Local address is being set.
JavaScript is prohibited on the Web browser cur-
rently used.
User Name and password verification during access
to VR-716 failed.
The current access rights is of a different level.
(☞ Page 94)
Clients should manage important information such
as passwords.
There is no timer program in the Weekly Timer or
Date Timer to be executed.
[AFTER RELEASE] setting at VR-716 is set to “NOR-
MAL REC”, hence recording starts in the Normal
Recording mode when the timer is released.
The starting day of the selected no. in the Weekly
Timer is not set to [DAY].
A maximum of 8 and 16 programs are allowed in
the Weekly Timer and Date Timer respectively.
Processing of setting request from the Web browser
failed.
System error is detected at VR-716.
Configuration between VR-716 and the PC client’s
network is incorrect.
Perform operation via the Web browser after stop-
ping or ending all operations on VR-716.
Disable the use of proxy servers in the “Internet
Options” Menu of the Web browser.
Alter the security level in the “Internet Options”
Menu of the Web browser.
Access VR-716 again and enter the correct user
name and password.
Login by entering a registered user name and
password with a higher level of access rights.
Deactivation of password that involves security
issue will be treated as repair. Please consult your
nearest JVC dealer.
Double-check settings of Weekly Timer and Date
Timer.
Recording cannot be stopped via the Web
browser. Press the [STOP] at VR-716 to stop re-
cording.
In the Program List for Weekly Timer, click the [UP]
button of the program for which the starting day is
set as [DAY]. Set this to the Daily mode.
To add new programs, do so using the [UP] and
[DEL] buttons in the Program List.
Select the menu item using the Menu button and
resend request, or refresh the URL and perform
operation via the Web browser again.
Check the operational status at VR-716.
Set the IP address of VR-716 and PC client to the
same network domain as well as workgroup.
Troubleshooting on Use of Browsers
Symptom Cause Action