Filter
Top Products
13
Names and Functions (Front Display)
Ⅵ Clock Display: Example > 12:34:56, 1 March
When in the Play mode, display of recording time on the playback screen is not
possible.
Ⅵ Date Display: Example > 1 March 2003 (When “DATE DISPLAY” setting in menu screen is “D/M/Y”)
Ⅵ Remaining Hard Disk Space Display: Example > 1234 hours left
Ⅵ “REC MODE” Settings: Example > “BLOCK”: “1”, “AUDIO REC”: “ON”, “REC QUALITY”: “H”, “FRAME RATE”: “25”
Ⅵ “REC MODE” Settings: Example > “BLOCK”: “2”, “AUDIO REC”: “OFF”, “REC QUALITY”: “L”, “FRAME RATE”: “1/12”
Ⅵ Error Code Display: Example > Error01
Displays the remaining time of continuous recording when in the normal re-
cording mode. Display is not shown during Repeat Recording.
Displays the recording conditions of each BLOCK when in the normal record-
ing, Timer Recording or Alarm Recording mode. When in the Stop or Timer
Standby mode, however, conditions for each BLOCK during normal recording
are displayed. In addition, recording conditions of the images currently being
played will be shown with priority when in the Play mode.
☞ Page 105 ‘Problems Related to Error Code and Onscreen Display’
DISPLAY
DISPLAY
DISPLAY
“FRAME RATE”
“REC QUALITY” “AUDIO REC”
“BLOCK NO.”
“FRAME RATE” is displayed as below corresponding to
each setting value in the “REC MODE” Menu (☞ Page 24)
25 IPS ➞ “25” 1.7 IPS ➞ “25/15”
12.5 IPS ➞ “25/2” 1 IPS ➞ “1”
8.3 IPS ➞ “25/3” 1/2 IPS ➞ “1/2”
4.2 IPS ➞ “25/6” 1/6 IPS ➞ “1/6”
2.5 IPS ➞ “25/10” 1/12 IPS ➞ “1/12”
0 Counter/Setting Display
Press the [DISPLAY] button 8 on the front panel to switch
between the clock display, date display, remaining space
display and record setting display.