Filter
Top Products
30
Menus (continued)
Item Settings Description
“DATE TIMER”
“START”/ “END”
TIME (HOUR)
“START”/ “END”
TIME (MINUTE)
“FRAME RATE”
“REC QUALITY”
“AUDIO REC”
“EXEC”
START DATE “M”
(MONTH)
START DATE “D”
(DAY)
“AFTER RELEASE”
For executing the recording of a program on a specific date.
Opens the “DATE TIMER” screen in the “PROGRAM TIMER” Menu for setting.
☞ Page 52 ‘Record Programming Using the Program Timer (Date Timer)’
For setting the starting/ending time (in units of hours) of the timer.
For setting the starting/ending time (in units of minutes) of the timer.
For setting the no. of frames to be recorded.
25 : “25 IPS” 1.7 : “1.7 IPS”
12.5 : “12.5 IPS” 1 : “1 IPS”
8.3 : “8.3 IPS” 1/2 : “1/2 IPS”
4.2 : “4.2 IPS” 1/6 : “1/6 IPS”
2.5 : “2.5 IPS” 1/12 : “1/12 IPS”
For setting the picture quality of the image to be recorded.
“H” : HIGH (High picture quality)
“N” : NORMAL (Normal picture quality)
“B” : BASIC (Basic picture quality)
“L” : LONG (Long-play quality)
For setting whether to record audio signals.
“A” : Audio signals recorded.
–:Audio signals not recorded.
For turning on/off the programmed timer.
“ON” : Starts recording on the specified date every year.
“OFF” : Timer not activated.
For setting the date (in the Month unit) at which timer recording is executed.
For setting the date (in the Day unit) at which timer recording is executed.
For setting the action when the timer is released upon pressing the [TIMER] button
during timer recording or timer standby, or when all the timer recordings have ended
and timers are released.
“CONTINUE” : When the timer is released during timer recording, it con-
tinues in the recording mode until the [STOP] button is
pressed.
When the timer is released during timer standby or when
all the timer recordings have ended, it remains in the stop
mode.
“NORMAL REC” : Stops recording using the Program Timer and switches to
recording in the mode as set in the “REC MODE” Menu
(☞ Page 24).
“STOP” : Stops recording using the Program Timer instantly.
00 ~ 23
00 ~ 59
25
12.5
8.3
4.2
2.5
1.7
1
1/2
1/6
1/12
“H”
“N”
“B”
“L”
“A”
–
● “ON”
“OFF”
1 ~ 12
1 ~ 31
“CONTINUE”
“NORMAL REC”
● “STOP”
“PROGRAM TIMER” Menu (continued)
[ ● ] are factory settings.
•“AUDIO REC” switches automatically to “–” when “1/6 IPS” (1 image per 6
seconds) or “1/12 IPS” (1 image per 12 seconds) is selected for “FRAME
RATE”.
• Switches automatically to “–” when “1/6 IPS” (1 image per 6 seconds) or “1/12
IPS” (1 image per 12 seconds) is selected for “FRAME RATE” item in the
menu.
• When execution date is set as February 28 and ending date as the following
day, the ending date of the program will be February 29 on leaps years and
March 1 otherwise.
Note
Note
Note
Action when timer is released according to the respective settings of “AFTER RELEASE”
Settings
Status when timer is released
Timer Recording Timer Standby All programs ended
CONTINUE
NORMAL REC
STOP STOP STOP
Continues in the timer recording mode
Starts normal recording Starts normal recording Starts normal recording
STOPSTOP
STOP