Filter
Top Products
25
“CAMERA TITLE” Menu
[ ● ] are factory settings. (Setting is disabled when in the Recording mode.)
Item Settings Description
“CAMERA 1” ~
“CAMERA 16”
Camera Channels 1 - 16 can be named separately.
☞ Page 72 ‘Setting a Title for Each Camera Channel Screen’
**********
Item Settings Description
“RECOVERY REC”
“REPEAT REC”
“LANGUAGE SELEC-
TION”
“WATER MARK”
“OPERATION LOCK”
For setting whether to perform Recovery Recording.
“OFF” : Switches to the Stop mode upon restoration from power failure. (Switches
to the Timer mode upon restoration if the Program Timer is set.)
“PRIOR STATE” : Re-starts recording upon restoration from power failure, only when
power failure occurs during recording.
“NORMAL REC” : Re-starts recording upon restoration from power failure.
☞ Page 71 ‘Continuing with Recording Upon Recovery from Power Failure’
For setting whether to perform Repeat Recording.
“OFF” : Repeat recording disabled.
“ALARM STOP” : Repeat Recording mode is disabled if alarm recording has been executed.
“ALARM LOCK” : Alarm recording is basically protected from overwriting during re-
peat recording, but images other than alarm recording may remain
if the hard disk space is filled up mostly by Alarm recording.
“ALL” : When there is insufficient hard disk space, previous recordings are
overwritten, starting from the oldest recording.
☞ Page 112 ‘Repeat Record’
For selecting a language displayed in the menu.
For setting whether to embed water mark in the recorded images.
“ON” : Records images with embedded water mark.
“OFF” : Records images without embedded water mark.
For setting the lock operation when the operation lock is ON.
“ALL” : Disables all operations.
“STOP REC” : Disables operation to start or stop recording.
● “OFF”
“PRIOR STATE”
“NORMAL REC”
● “OFF”
“ALARM STOP”
“ALARM LOCK”
“ALL”
● “ENGLISH”
“GERMAN”
“FRENCH”
“ITALIAN”
“SPANISH”
“ON”
● “OFF”
● “ALL”
“STOP REC”
“OPERATION” Menu
[ ● ] are factory settings. (Setting is disabled when in the Recording mode.)
•For details on water mark detection, please refer to the application software
[VR-716 Player] Manual (CD-ROM) provided.
“EXT REC” Menu
[ ● ] are factory settings. (Setting is disabled when in the Recording mode.)
Item Settings Description
“EXT REC MODE”
“SERIES REC”
For setting whether to start automatic recording when external signals are received
at the [EXT REC IN] of the signal input/output terminal.
“OFF” : Automatic recording not executed.
“TRIGGER” : Starts recording upon receiving external signals.
“MANUAL” : Continues recording when external signals are input.
☞ Page 61 ‘Activation of Recording Via External Signals’
For setting whether to execute SERIES recording based on signals received at the
[SERIES REC IN/OUT] terminal.
“ON” : Executes SERIES recording based on [SERIES REC IN/OUT] signals.
“OFF” : Does not execute SERIES recording based on [SERIES REC IN/OUT] signals.
☞ Page 61 ‘Series Recording Using 2 or More VR-716 Recorders’
● “OFF”
“TRIGGER”
“MANUAL”
“ON”
● “OFF”
Notes
FRAME RATE (IPS)
REC
QUALITY
H
N
B
L
25 12.5 8.3 4.2 2.5 1.7 1 1/2 1/121/6
• When in the 1 input per block mode, water mark will not be recorded depending
on the setting.
Refer to the following table. ( : recordable, : not recordable)