Filter
Top Products
77
1.
Press the [MENU] button
• Use [ ] to move the cursor to “NET-
WORK”.
2.
Press the [ ] button
• Displays the “NETWORK” screen.
Factory settings are as follows:
• “METHOD” : “STATIC” (DHCP not used)
• “IP ADDRESS” : 192.168.0.10
• “NET MASK” : 255.255.255.0
• “DEFAULT GATEWAY” : 192.168.0.254
Consult the network administrator if there are prescribed settings in
the LAN environment for which VR-716 is to be connected.
3.
Press [ ] to move the cursor to the item to be
altered and turn the jog dial.
4.
Move the cursor to “<=: RETURN” using [ ] and
press [ ]
5.
Press [MENU] to end setting
• The display returns to the normal screen. (“IP ADDRESS SETTING IN
PROGRESS...” may be displayed.)
Setting Up a Network for VR-716
Perform the initial setup at the main unit of
VR-716 by referring to the monitor screen
connected to VR-716.
MENU
MENU
REV FWD
CLOCK SET
ONSCREEN MODE
FDP/BUZZER
REC MODE
CAMERA TITLE
OPERATION/EXT REC
MONITOR DISPLAY
ALARM SENSOR MODE
PROGRAM TIMER
NETWORK
DISK UTILITY/MAINTENANCE
MAIN MENU/OPERATION MENU
NETWORK
1.HOST NAME
2.METHOD
3.IP ADDRESS
4.NET MASK
5.DEFAULT GATEWAY
6.NAME SERVER
MAC ADDRESS
<= : RETURN
STATIC
[CANCEL]:DELETE
vr716
192.168. 0. 10
255.255.255. 0
192.168. 0.254
0. 0. 0. 0
00:80:88:40:b0:00
NETWORK
1.HOST NAME
2.METHOD
3.IP ADDRESS
4.NET MASK
5.DEFAULT GATEWAY
6.NAME SERVER
MAC ADDRESS
<= : RETURN
[CANCEL]:DELETE
STATIC
vr716
192.168. 0. 10
255.255.255. 0
192.168. 0.254
0. 0. 0. 0
00:80:88:40:b0:00
NETWORK
1.HOST NAME
2.METHOD
3.IP ADDRESS
4.NET MASK
5.DEFAULT GATEWAY
6.NAME SERVER
MAC ADDRESS
<= : RETURN
[CANCEL]:DELETE
STATIC
vr716
192.168. 0. 10
255.255.255. 0
192.168. 0.254
0. 0. 0. 0
00:80:88:40:b0:00
SEARCH
MENU
REV
SKIP
FWD
HDD
OPERATE
LOCK
VIDEO AUDIO
OUT
EXECUTE
3.
1.2.3.4.
1.5.
• If DHCP is selected, DHCP server assigned
by IP address will be displayed when dis-
playing this menu again after exiting it. (Can-
not be altered.)
• When “DHCP” is selected, this unit will only
acquire the IP address during startup or
changing of setting. When the network is
valid after startup, to acquire the IP address,
set “METHOD” back to “DHCP” if it has been
set otherwise.
Notes