Filter
Top Products
59
DISPLAY
CANCEL
SEARCH
MENU
REV
SKIP
FWD
HDD
OPERATE
LOCK
VIDEO AUDIO
OUT
EXECUTE
TIMER
1.
3.2. 3.4.
1.AUTO SCAN DISK
2.MANUAL SCAN DISK OFF
OFF
3.DEFRAG DATABASE
4.FORMAT
5.MIRRORING
DISK UTILITY
MIRRORING
BUILT-IN HDD 1 : 76GB OK
BUILT-IN HDD 2 : 76GB OK
MIRRORING SETTING
ALL HDD DATA WILL BE DELETED!!
NO MIRRORING SETTING
SET [YES] FOR MIRRORING SETTING
YES
[EXEC]:START MIRROR
ALL HDD DATA IS DELETED!!
IT TAKES APPROX. 1HOUR
START?
MIRRORING CONFIRMATION
[CANCEL]:CANCEL [EXEC]:START
BUILD-IN HDD 1 : NOW MIRRORING SETTING...
BUILD-IN HDD 2 : NOW MIRRORING SETTING...
MIRRORING SETING
MIRRORING SETTING TAKES APPROX. 1 HOUR
------ NOW SETTING [97.2%] ------
BUILD-IN HDD 1 : MIRRORING SETTING SUCCEEDED
BUILD-IN HDD 2 : MIRRORING SETTING SUCCEEDED
MIRRORING SETING
HDD UPDATE IS COMPLETED
PRESS [OPERATE] FOR OPERATION
MENU
EXECUTE
EXECUTE
REV FWD
Ⅵ Mirroring Setting
1.
Press the [MENU] button
•Follow procedures in ‘Changing Menu Settings’ on page 22 to display
the “DISK UTILITY/MAINTENANCE” Menu and the “DISK UTILITY”
screen.
2.
Select the “MIRRORING”
item using [
] and
press [
]
• This displays the “MIRRORING” Menu
screen.
3.
Turn the jog dial to select “YES” and press
[EXECUTE] button
• This displays the “MIRRORING CON-
FIRMATION” screen.
4.
Press the [EXECUTE] button again
• Setting takes approximately 1 hour,
upon which mirroring setting will be
completed.
• Upon completion, the “MIRRORING
SETTING SUCCEEDED” screen will be
displayed.
• Press [OPERATE] button to start.
Hard Disk Mirroring
• Mirroring settings can be undone in the Mir-
roring mode. (☞ Page 60)
• Recording and playback are not possible
when performing mirroring setting.
• The hard disk capacity displayed on the
screen is calculated based on 1 GB = (1024)
3
Bytes. Therefore it is displayed as lower than
the actual capacity.
Notes
Mirroring refers to recording the same data in the 2 built-in hard disks. In this way, recorded data can be secured even if data in one
of the hard disks is damaged.
• When mirroring is set, recordable space in
the hard disk will reduce by half.
Pay attention when setting the recording du-
ration.
• Mirroring can only be set for built-in hard
disks. Mirroring at external hard disk drives
are not possible.
• There is no guarantee that data will not be
damaged when mirroring is set.
•When mirroring settings are activated,
events recorded in the built-in as well as
external hard disks will be deleted. Ensure
to create a backup for important event
records.
•When mirroring settings are activated, play-
back speed may slow down or image and
sound may be out of sync, depending on
the record settings and operational state.
This does not affect the recording opera-
tion.
Caution