Filter
Top Products
39
Viewing Recorded Images in the Split Screen Mode
1.
Press the [PLAY] button
• The playback mark [<] on the front display lights up and playback starts.
2.
Press the ‘Camera Selection’ button
• Select the camera no. for which its im-
age is to be displayed on the monitor.
3.
Press the ‘Camera Selection’ button again
• Monitor will display in quad picture.
Connect the monitor for viewing the playback
image to the [VIDEO OUT] terminal.
• If there is no image in the selected camera
no., the “SPECIFIED IMAGE IS NOT RE-
CORDED” message will be displayed. In this
case, jump using the [SKIP] button.
• Display in the Split Screen mode is possible
only when multiple cameras are set to “ON”
for the selected camera block in the “REC
MODE” Menu (☞ Page 24).
• When selecting cameras from different blocks,
images may distort or error may occur in the
time display if the “REC MODE” Menu settings
(☞ Page 24) vary across the blocks.
•Recorded images cannot be viewed in 16 Split
pictures.
To exit quad picture
To view image of other cameras in the
Split Screen
• Press the ‘Camera Selection’
button.
Image of the selected cam-
era no. will be played back on
the monitor.
• Select the camera no. to be
displayed on the monitor by press-
ing the ‘Camera Selection’ button
twice.
‘Camera Selection’
Front Display
ALARM
SENSOR
SEQUENCE
MULTI
REC STOP PLAY STILL
D
C
ALARM
SENSOR
ALARM
SENSOR
ALARM
SENSOR
11 1
910
34
12
78
56
13 14
15 16
2.3. 1.
PLAY
3
3
3
5 5
CAMERA 3
CAMERA 3
CAMERA 2
CAMERA 4
CAMERA 1
CAMERA 3
CAMERA 5 CAMERA 6
CAMERA 7 CAMERA 8
CAMERA 5
Notes