Filter
Top Products
67
SEARCH
MENU
REV
SKIP
FWD
HDD
OPERATE
LOCK
VIDEO AUDIO
OUT
EXECUTE
9.
7.8.6.8.
SEQUENCE
MULTI
REC STOP PLAY STILL
DISPLAY
CANCEL
SEARCH
78
56
13 14
15 16
TIMER
REV FWD
MENU
1.ALARM/SENSOR MODE ON
ON
ON
OFF
ON
OFF
OFF
ON
2.ALARM/SENSOR BLINK
3.SEQUENTIAL MONITOR
4.INPUT SIGNAL ERROR
5.WARNING
[BUZZER]
1.HDD FULL
2.ALARM/SENSOR
3.WARNING
FDP/BUZZER
[ FDP ]
1.EE OUT 1-4/-16
2.SINGLE PICTURE MODE
3.QUAD PICTURE MODE
BLOCK 1
BLOCK 2
BLOCK 3
BLOCK 4
4.ALARM/SENSOR SWITCH
5.SPLIT SCREEN BORDER COLOR
MONITOR DISPLAY
1-16
1SEC
1SEC
1SEC
1SEC
OFF
BORDER3
1.BLOCK 3
2.REC MODE ALARM
25 IPS
180SEC
10SEC
ON
OFF
OFF
OFF
H
3.FRAME RATE
4.QUALITY
5.DURATION
6.AUDIO REC
7.PRESENSOR REC
8.PRESENSOR REC DURATION
9.EXT INPUT OPERATING MODE
10.MOTION DETECT
11.MOTION DETECT SETTING
ALARM/SENSOR MODE
6.
Press [ / ] to move the cursor to the
“BLOCK” item
7.
Turn the jog dial to select
“3”
• Setting can now be performed for Camera 9 ~ Camera 12.
8.
Repeat procedure in Step
5
to select the “REC
MODE” item and set a value accordingly
9.
Press [MENU] to end menu setting
• The display returns to the normal screen.
• The [AL REC] or [SENSOR REC] indicator on the front display will
appear.
• In the case when “REC MODE” is set to
“ALARM”, press the [REC] button after
menu setting is completed. Alarm record-
ing will be executed in the specified mode
when alarm input is received.
• In the case when “REC MODE” is set to
“SENSOR”, press the [STOP] button after
menu setting is completed. Sensor record-
ing will be executed in the specified mode
when alarm input is received.
• Press the [CANCEL] button to stop the
buzzer sound during alarm or sensor re-
cording. Press the [CANCEL] button again
during alarm recording to return to the nor-
mal recording mode or during sensor re-
cording to stop the operation.
• Press the [CANCEL] button once again and
the Alarm/Sensor [AL] indicator on the front
display will stop blinking.
Notes
[CANCEL]
Front Display
Ⅵ Notification During Alarm Recording or Sensor
Recording
Front Display
For setting the switching mode of the
monitor screen when alarm signals are
received. ☞ Page 26 ‘MONITOR DISPLAY
Menu’
[AL] indicator on the front display will
appear during alarm or sensor recording
when this is set to “ON”.
[AL] indicator on the front display will blink
after alarm or sensor recording has ended
when this is set to “ON”.
Buzzer will sound when this is set to “ON”.