Filter
Top Products
68
SEARCH
MENU
REV
SKIP
FWD
HDD
OPERATE
LOCK
VIDEO AUDIO
OUT
EXECUTE
1.
2.3.5.3.4.
MENU
REV FWD
REV FWD
1.BLOCK 1
2.REC MODE ALARM
25 IPS
180SEC
10SEC
ON
OFF
OFF
OFF
H
3.FRAME RATE
4.QUALITY
5.DURATION
6.AUDIO REC
7.PRESENSOR REC
8.PRESENSOR REC DURATION
9.EXT INPUT OPERATING MODE
10.MOTION DETECT
11.MOTION DETECT SETTING
ALARM/SENSOR MODE
REV FWD
1.BLOCK 1
2.REC MODE ALARM
25 IPS
180SEC
10SEC
ON
OFF
OFF
OFF
H
3.FRAME RATE
4.QUALITY
5.DURATION
6.AUDIO REC
7.PRESENSOR REC
8.PRESENSOR REC DURATION
9.EXT INPUT OPERATING MODE
10.MOTION DETECT
11.MOTION DETECT SETTING
ALARM/SENSOR MODE
1.BLOCK
2.CAMERA 1 SCENE
MOTION DETECT SETTING
AREA SETTING
MANUAL
3.CAMERA 2 SCENE
AREA SETTING
MANUAL
MANUAL
MANUAL
4.CAMERA 3 SCENE
AREA SETTING
5.CAMERA 4 SCENE
AREA SETTING
1
1.
Press the [MENU] button
•Follow procedures in ‘Changing Menu Settings’ on page 22 to display
the “ALARM/SENSOR MODE” Menu.
2.
Turn the jog dial to select a
block
3.
Press [ ] and turn the jog dial to set a value for
each item
4.
Select the “MOTION DETECT SETTING” item us-
ing [ ] and press [ ]
• This displays the “MOTION DETECT
SETTING” Menu screen.
5.
Turn the jog dial to select
“BLOCK”
• When cameras are connected, flickering
fluorescent lights may give rise to false de-
tection. In this case, set the camera to
flickerless. (☞ Instruction manual of cam-
era used)
• Ensure that an item other than “OFF” is se-
lected for the “MOTION DETECT” item
(☞ page 28).
Motion Detect will not activate yet after set-
ting is completed.
• The Motion Detect feature is not designed
to prevent thefts or fire disasters. We do not
bear responsibility for any loss incurred due
to accidents or damages.
Caution
Using the Motion Detect Feature
Useful Features (continued)
VR-716 comes equipped with a Motion Detect feature, whereby the monitor screen is divided into 150 areas and alarm/sensor
recording is automatically executed upon detection of image motion within these areas.
• Set “BLOCK” to “1”:
Sets detection of motion at Camera 1 ~ Camera 4.
• Set “BLOCK” to “2”:
Sets detection of motion at Camera 5 ~ Camera 8.
• Set “BLOCK” to “3”:
Sets detection of motion at Camera 9 ~ Camera 12.
• Set “BLOCK” to “4”:
Sets detection of motion at Camera 13 ~ Camera 16.
For selecting a record mode.
For selecting the frame rate during
recording.
For selecting the picture quality during
recording.
For selecting the duration of recording.
For selecting whether to execute audio
recording during recording.
For selecting whether to activate
presensor recording. ☞ Page 113
‘Presensor Recording’
For selecting the duration of presensor
recording.
For setting the operation of Motion Detect.
☞Page 28 ‘ALARM/SENSOR MODE
Menu’