Filter
Top Products
29
Item Settings Description
“WEEKLY TIMER”
“START”/ “END”
DAY
“START”/ “END”
TIME (HOUR)
“START”/ “END”
TIME (MINUTE)
“FRAME RATE”
“REC QUALITY”
“AUDIO REC”
“EXEC”
Opens the “WEEKLY TIMER” screen in the “PROGRAM TIMER” for setting.
☞ Page 50 ‘Record Programming Using the Program Timer (Weekly Timer)’
Starts/Ends recording at a specific time every week/day.
For setting the day of the week for which recording starts/ends (or to start/end re-
cording on a daily basis). Starting/Ending time can be set using the “START”/ “END”
TIME (HOUR) and “START”/ “END” TIME (MINUTE) items described below.
“SUN” ~ “SAT” :For setting the day of the week for which recording starts/ends.
“DAY” :Starts recording at a specific time everyday. In this case, days of
the week for which recording is to be activated can also be speci-
fied.
For setting the starting/ending time (in units of hours) of the timer.
For setting the starting/ending time (in units of minutes) of the timer.
For setting the no. of frames to be recorded.
25 : “25 IPS”
12.5 : “12.5 IPS”
8.3 : “8.3 IPS”
4.2 : “4.2 IPS”
2.5 : “2.5 IPS”
1.7 : “1.7 IPS”
1:“1 IPS”
1/2 : “1/2 IPS”
1/6 : “1/6 IPS”
1/12 : “1/12 IPS”
For setting the picture quality of the image to be recorded.
“H” : HIGH (High picture quality)
“N” : NORMAL (Normal picture quality)
“B” : BASIC (Basic picture quality)
“L” : LONG (Long-play quality)
For setting whether to record audio signals.
“A” : Audio signals recorded.
–:Audio signals not recorded.
For turning on/off the timer.
“OFF” : Timer not activated.
“ON” : Turns “OFF” after recording has been executed once on a specific
day/time. (Remains in the “ON” mode if “DAY” has been selected as
the starting day.)
“WLY” : Timer activates during the time range set on a weekly basis. Dis-
abled when “START”/ “END” DAY is set as “DAY”.
“SUN”, “MON”, “TUE”,
“WED”, “THU”, “FRI”,
“SAT”, “DAY”
00 ~ 23
00 ~ 59
25
12.5
8.3
4.2
2.5
1.7
1
1/2
1/6
1/12
“H”
“N”
“B”
“L”
“A”
–
“OFF”
“ON”
“WLY”
“PROGRAM TIMER” Menu
Setting is disabled when in the Recording mode.
•“AUDIO REC” switches automatically to “–” when “1/6 IPS” (1 image per 6
seconds) or “1/12 IPS” (1 image per 12 seconds) is selected for “FRAME
RATE”.
• Switches automatically to “–” when “1/6 IPS” (1 image per 6 seconds) or “1/12
IPS” (1 image per 12 seconds) is selected for “FRAME RATE” in the menu.
Note
Note