Filter
Top Products
42
•••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••
•
Multiplexer functions (continued)
♦ How to use the camera number buttons
By pressing each camera number button, you can view the camera’s picture which is connected to the CAMERA
INPUT on the rear of this unit. If the picture of the camera which is not set to operate on DEFINE GROUP SETTING of
the <NORMAL REC SETTING> menu and <A-REC/M-DET SETTING> menu, the Not-operated camera mark (
) will
appear next to the time display. You can also view the picture of the camera when watching SPLIT or SEQUENCE
screen by pressing the camera number button.
■ SPLIT/SEQUENCE button
By pressing the SPLIT/SEQUENCE button, the SPLIT picture modes will be switched as follows:
SPLIT 9b
SPLIT 4a SPLIT 4b SPLIT 4c
Single screen sequential SPLIT 4 sequential SPLIT 9 sequential
SPLIT 9aSPLIT 16
SPLIT 4d
■ The functions of the SPLIT/SEQUENCE button, ZOOM button and camera number buttons
SPLIT 16
Flashing/illuminating
Of Camera number buttons
Display the picture of the camera for the time which is set on SEQUENCE of the
<MPX DISPLAY> menu. Camera number button which has display is illuminating.
When a screen from a camera designated as non-operational is displayed, the camera
number display will show
"-"
and the non-operational camera mark ( ) will appear next to
the recording time.
Images taken from the camera number selected as SPLIT4 a (b,c or d) of the SPLIT 4
SETTING on the <MPX DISPLAY> menu are displayed on a 4-split screen. Images will be
changed in sequence and displayed as the selected camera’s camera number button is lit.
Please set DEFINE GROUP SETTING on <NORMAL REC SETTING> or <A-REC/M-DET
SETTING> menu. Camera number button which is set to be operated on DEFINE GROUP
SETTING of <NORMAL REC SETTING> menu and <A-REC/M-DET SETTING> menu will
only illuminates.
Camera number button which has display is illuminating.
Camera buttons which has been activated as DISPLAY-1, X2 or X4 will be
illuminated.
The video of operated camera will be displayed in SPLIT 16 mode.The video of cameras will
be shown in order. Set the order on DEFINE GROUP SETTING of the <NORMAL REC
SETTING> menu and <A-REC/M-DET SETTING> menu. Camera number button which is set
to be operated on DEFINE GROUP SETTING of <NORMAL REC SETTING> menu and
<A-REC/M-DET SETTING> menu will only illuminates.
SPLIT/
SEQUENCE
OFF
SPLIT/SEQUENCE
OFF
ZOOM
OFF
SPLIT/SEQUENCE
OFF
SPLIT/SEQUENCE
OFF
SPLIT/SEQUENCE
OFF
ZOOM
OFF
ZOOM
OFF
ZOOM
OFF
ZOOM
ZOOM
Display
ZOOM
button
Page
SPLIT/SEQUENCE
Illuminating
Illuminating
SPLIT/SEQUENCE
Illuminating
SPLIT 4 MODE a (4a)
SPLIT 4 MODE b (4b)
SPLIT 4 MODE c (4c)
SPLIT 4 MODE d (4d)
Single screen Seqential
Single
screen
SPLIT 9 Sequential
During Alarm recording
and Pre-alalrm recording
Not
enlarged
Enlarged
*If the Alarm signal
and pre-alarm signal
is input during
SPLIT/SEQUENCE
mode.
1
2
3
4
06-09-2000 12:12:05 12.5F
06-09-2000 12:12:05 12.5F
43
44
SPLIT 9 MODE a (9a)
SPLIT 9 MODE b (9b)
Images taken from the camera number selected as SPLIT9 a (or b) of the SPLIT 9 SETTING
on the <MPX DISPLAY> menu are displayed on a 9-split screen. Images will be changed in
sequence and displayed as the selected camera’s camera number button is lit. Please set
DEFINE GROUP SETTING on <NORMAL REC SETTING> or <A-REC/M-DET SETTING>
menu. Camera number button which is set to be operated on DEFINE GROUP SETTING of
<NORMAL REC SETTING> menu and <A-REC/M-DET SETTING> menu will only illuminates.
OFF
SPLIT/SEQUENCE
OFF
ZOOM
1
2
4
56
7
89
3
06-09-2000 12:12:05 12.5F
43, 44
41
41
53, 54
The present time display is changed to be DISPLAY MODE 1, when in SPLIT or SEQUENCE screen mode.
You cannot arrange the place of the present time display. If the camera picture without the picture input signal
is displayed, the screen will be shown as a blue screen. When in SPLIT or SEQUENCE screen mode,
Not-operated camera's picture will be shown as a black screen.
SPLIT 9 display (ab or a) which is set on SEQUENCE of the <MPX DISPLAY>
menu will be displayed for set up time. Camera number button which is set to
be operated on DEFINE GROUP SETTING of <NORMAL REC SETTING>
menu and <A-REC/M-DET SETTING> menu will only illuminates.
When a screen from a camera designated as non-operational is displayed,
the camera number display will show "-".
Regardless of SPLIT 16,SPLIT 9, SPLIT 4 or DISPLAY-1mode, camera number
buttons which are activated via an Alarm recording and Pre-alarm recording
start flashing.
41
41, 43
OFF
ZOOM
SPLIT/SEQUENCE
Illuminating
SPLIT 4 Sequential
1
2
5
6
06-09-2000 12:12:05 12.5F
41, 43
06-09-2000 12:12:05 12.5F
2134
1413 15 16
1091112
6578
SPLIT 4 display (abcd,abc,ab or a) which is set on SEQUENCE of the
<MPX DISPLAY> menu will be displayed for set up time. Camera number
button which is set to be operated on DEFINE GROUP SETTING of <NORMAL
REC SETTING> menu and <A-REC/M-DET SETTING> menu will only
illuminates. When a screen from a camera designated as non-operational is
displayed, the camera number display will show "-" .
1
2
4
56
7
89
3
06-09-2000 12:12:05 12.5F