Filter
Top Products
31
RQT9487
Recording
Operation during Recording
Check the recording
programme
Press [STATUS ].
e.g., while 2 programmes simultaneous recording
001 TV ONE
HDD
REC1
002 TV2 REC2
Recording programme
displayed on the TV screen
Recording programme not
displayed on the TV screen
Switch the input
Press [INPUT SELECT].
Switch to other channel
Press [
1
2
CH].
Display the recording
programme on the TV
screen
It is necessary to display the recording programme onto the TV screen to perform operations such as
pause.
If the input was switched: Press [INPUT SELECT].
If the channel was switched: Press [
1
2
CH].
If the drive was switched: Press [DRIVE SELECT].
To stop recording
It is necessary to display the programme you want to stop on the TV screen. (➡ above)
Press [
g
].
From the start to the end of the recording is called one title.
To pause recording
It is necessary to display the programme you want to pause on the TV screen. (➡ above)
Press [h].
Press again to restart recording.
You can also press [
*
REC] to restart.
(Title is not split into separate titles.)
If paused while recording in DR mode, the paused part may become a still picture for a moment during
playback of that programme.
Perform 2 programmes
simultaneous recording
Record other programme with steps 1–4 on page 22.
One of the 2 programmes needs to be digital broadcasting recorded with DR mode.
“Manual recording” is also available. (➡ 54)
REC1
REC2
“REC1” and “REC2” will light.
unit’s display;
Channel switch / input switch while performing 2 programmes simultaneous recording will switch
between the 2 recording programmes.