Filter
Top Products
33
RQT9487
Recording
To release the unit from recording
standby
Even when the unit is turned off, you can display the timer recording
list by pressing [PROG/CHECK].
1 Press [PROG/CHECK].
2 Press [
e
,
r
] to select the programme
and press the “Red” button.
The timer icon “
z
” (➡ 34) will change from red to grey.
You cannot cancel timer recording standby mode as long as
even one timer icon “
z
” (red) remains in the timer recording
list.
Press the “Red” button again to activate timer recording
standby. (The timer icon “
z
” will change to red.)
Auto Renewal Recording
If you record a programme repeatedly everyday or every week using
timer recording, the unit will record the new programme over the old
one.
This function can be used only when weekly recording or daily
recording is selected. (➡ 23)
1 Press [PROG/CHECK].
2 Press [
e
,
r
] to select the programme
and press [OK].
3 Press [
w
,
q
] to select “Renew”
column.
4 Press [
e
,
r
] to select “ON” and press
[OK].
Note
If a programme set for Auto Renewal Recording is protected or
while playback is taking place from the HDD, or while copying, the
programme will not be overwritten. Instead the programme set for
recording will be saved as a separate programme, and this
programme will be the one to be overwritten when the next Auto
Renewal Recording takes place.
When there is not enough space on the HDD, the programme may
not be recorded completely.
To cancel recording when recording
has already begun
Press [INPUT SELECT] or [1 2 CH] to display the programme that
you want to stop recording on the TV screen while 2 programmes
are simultaneously recording.
1 Press [
g
].
e.g.,
Stop Recording
Yes
No
Timer recording of this programme in progress.
Stop this timer recording?
Recording [ TV ONE 001 ]
OK
RETURN
2 Press [
w
,
q
] to select “Yes” and press
[OK].
If you stop a timer recording, it will be cancelled.
However, if you have already set the weekly or daily timer
recording, the recording will start at the next scheduled
time.