Filter
Top Products
34
RQT9487
Check, change or delete a programme
Even when the unit is turned off, you can display the timer recording
list by pressing [PROG/CHECK].
Press [PROG/CHECK].
Channel Name Schedule Drive/Mode Space
New Timer Programme
OK
RETURN
Page Up
Page Down
CH
Timer Off
Total 4/32
History List
Timer Recording
75:15 DR
HDDRemain
OK
z
!
z
z
FRI 27.03.2009 21:41
DEL
Delete
TVNZ 6
The sitting
TV ONE
ONE News Tonight
TV2
Supernatural
TV ONE
How To Look Good Naked
FRI 27.03
22:20 - 22:30
FRI 27.03
22:30 - 23:00
FRI
22:30 - 23:25
FRI 27.03
21:30 - 23:30
HDD
DR
HDD
DR
HDD
DR
-->
24.04
HDD
DR
Icons
z
Red: Timer recording standby is activated.
Grey: Timer recording standby is not activated.
*
This programme is currently recording.
Part or all of the programme will not be recorded since
the programme is overlapping.
The HDD was full so the programme failed to record.
The programme was copy-protected so it was not
recorded.
The programme did not complete recording because of
some reason.
Timer programmes set to Auto Renewal Recording
(➡ 33).
OK: Displayed if the recording can fi t in the remaining
space.
J (Date):
For recordings made daily or weekly, the display
will show until when recordings can be made (up
to a maximum of one month from the present
time) based on the time remaining on the HDD.
! : It may not be possible to record because:
y there is not enough space left.
y the number of possible titles has reached its
maximum. (➡ 28)
■ To change a programme
Press [
e
,
r
] to select the programme and press [OK]. (➡ 23,
step 3)
■ To delete a programme
Press [
e
,
r
] to select the programme and press [DEL].
■ To confi rm the History List
1 Press the “Green” button.
2 Press [
e
,
r
] to select the programme and press [OK].
y Reason why the timer recording failed or similar can be
confi rmed. Press [OK] again to exit.
y Press the “Green” button to return to the previous screen.
■ To exit the timer recording list
Press [PROG/CHECK].
Note
Programmes that failed to record are deleted from the timer
recording list at 4 a.m. two days later.
Notes on timer recording
y Timer recording will not be performed if the clock is not set.
y If “TV System” (➡ 88) in the Setup menu was modifi ed to playback
a disc or a title while on timer recording standby, return the setting
to original before the recording is started.
y Timer recordings are activated regardless of whether the unit is
turned on/off.
y Timer recordings begin when the set time is reached even when
playing.
y Timer recordings do not begin while copying in normal speed
mode.
y The timer recording starts, whether the unit is turned on or off. If
the recording starts with the unit turned on, you can turn the unit
off without affecting the recording status. This unit’s on/off status
during the timer recording will not change after the timer recording
fi nishes.
y When you programme successive timer recordings to start
immediately one after the other, last 1 minute of earlier
programme will not be recorded unless it can perform 2
programmes simultaneous recording.
Recorded Recorded
ProgrammeProgramme
Not recorded
y If timer recordings overlap around the same time, some
programmes will not be recorded depending on the set timer
recordings. As for programmes with “
” displayed on the timer
recording list screen, some portion or all of the programmes
cannot be recorded. Press [PROG/CHECK] to confi rm. (➡ left)
Starting of the timer recording while executing other operation
(➡ 99)
Advanced timer recording
HDD