Filter
Top Products
87
RQT9487
Convenient
functions
Dolby Digital
1
DTS
2
MPEG
1
Select to output Dolby Digital, DTS Digital Surround or MPEG
as bitstream or PCM.
Note
Not making the proper settings may result in noise.
If the unit is connected with the HDMI AV OUT terminal, the
specifi cations of the connected equipment take preference
over this unit and audio selected in these items may not be
output (e.g., when a television is connected, the HDMI audio
output of this unit is limited to down-mixed 2 ch.).
[Bitstream] Select “Bitstream” when the connected
equipment can decode the respective audio
format.
[PCM] Select “PCM” when the connected equipment
cannot decode the respective audio format.
Refer to the operating instructions for connected
devices to verify whether or not they can decode
each of the audio formats.
Set the speaker output on the amplifi er when
output with PCM.
1
The default setting is “PCM”.
2
The default setting is “Bitstream”.
HE-AAC
Select to output HE-AAC as bitstream or PCM.
[Bitstream (DTS)] Select “Bitstream (DTS)” when the
connected equipment can decode HE-AAC
format.
[PCM] Select “PCM” when the connected
equipment cannot decode HE-AAC format.
Set the speaker output on the amplifi er
when output with PCM.
Audio Mode for XP Recording
Choose the audio type when recording or copying with XP mode.
[Dolby Digital] (➡ 114) [LPCM] (➡ 114)
The picture quality of LPCM recordings may be lower than that
of normal XP mode recordings.
The audio recording becomes Dolby Digital even if you selected
LPCM when using a recording mode other than XP.
When recording a bilingual broadcast, select the type of audio
in advance from “Bilingual Audio Selection” (➡ 86).
Audio Mode for DV Input
You can select the kind of audio when recording from the unit’s
DV input terminal (➡ 54).
[Stereo 1] Records audio (L1, R1).
[Stereo 2] Records added audio such as narration (L2, R2)
subsequent to original recording.
[Mix] Records both Stereo 1 and Stereo 2.
When recording bilingual broadcast, select the type of audio in
advance from “Bilingual Audio Selection” (➡ 86).
Audio Mode for Digital Broadcast
Select the initial setting for audio tracks.
[Automatic] Automatically selects the audio tracks if
programme has more than two tracks.
The priority is given in the following order -
Dolby Digital Plus, HE-AAC, Dolby Digital,
MPEG.
[MPEG] The priority is given to MPEG as long as the
programme contains MPEG audio.
Audio Channels for HG/HX/HE/HL Recording
This will set the audio when converting the recording mode to
HG, HX, HE or HL, from DR (➡ 44).
[5.1-channel]
Record using 5.1 ch audio.
[2-channel] Record using 2 ch audio.
If the audio sampling frequency is not 48 kHz, surround audio is
mixed and recorded in front LR channels. Audio will be output
from two front speakers only, even if you play it on 5.1 ch
speaker connection.