Filter
Top Products
55
RQT9487
With Other
Equipment
Recording via AV2 input
RAM
-R
-RW(V)
+R
+RW
It is possible to record to disc from equipment connected to the AV2
input terminals.
Recording mode is FR mode. (➡ 28)
Preparation
Press [DRIVE SELECT] to select the DVD drive.
RAM
If the disc is protected, release protection (➡ 80, Setting the
protection).
When the output signal from the external equipment is NTSC,
change “TV System” to “NTSC” in the Setup menu (➡ 88).
1 While stopped
Press [FUNCTION MENU].
2 Press [
e
,
r
] to select “Others” and
press [OK].
3 Press [
e
,
r
] to select “Recording via
AV2 input” and press [OK].
It may take a while for the next screen to display while
preparing to record.
RETURN
OK
Recording via AV2 input
Set recording time
Recording will stop when
timer recording starts.
Hour
8
Min.
00
Start
Cancel
Please set recording time.
Maximum recording time
Record in FR mode.
8 hour 00 min.
4 Press [
w
,
q
] to select “Hour” and
“Min.” and press [
e
,
r
] to set the
recording time.
You can also set the recording time with the numbered
buttons.
You cannot record more than 8 hours.
5 Start play on the other equipment.
6 When you want to start recording
Press [
w
,
q
] to select “Start” and
press [OK].
Recording starts.
To exit the screen without recording
Press [RETURN
].
To stop recording partway
Press [
g
].
To show the remaining time
Press [STATUS
].
Note
-R
+R
It may not be able to record after repeating about 30 times
of step 6 or recording or editing.
-R
-RW(V)
After fi nalising, chapters for every 5 minutes will be
created.
+R
After fi nalising, chapters for every 8 minutes will be created.
+RW
Regardless of creating the top menu, chapters for every 8
minutes will be created.
Flexible Recording via AV input
(Recording that fi ts the size of a new DVD)
HDD
The title is recorded to the size of a new DVD (4.7 GB) by
automatically selecting optimal quality between XP and EP (8
hours).
Preparation
Press [DRIVE SELECT] to select the HDD drive.
Press [INPUT SELECT] to select “AV1”, “AV2” or “DV”.
When the output signal from the external equipment is NTSC,
change “TV System” to “NTSC” in the Setup menu (➡ 88).
1 While stopped
Press [FUNCTION MENU].
2 Press [
e
,
r
] to select “Others” and
press [OK].
3 Press [
e
,
r
] to select “Flexible
Recording via AV input” and press
[OK].
RETURN
OK
Flexible Recording via AV input
Maximum recording time
Set recording time
Hour
8
Min.
00
Start
Cancel
Record in FR mode.
8 hour 00 min.
Maximum recording time
This is the maximum recording time in
EP (8 hours) mode.
4 Press [
w
,
q
] to select “Hour” and
“Min.” and press [
e
,
r
] to set the
recording time.
You can also set the recording time with the numbered
buttons.
You cannot record more than 8 hours.
5 Start play on the other equipment.
6 When you want to start recording
Press [
w
,
q
] to select “Start” and
press [OK].
Recording starts.
To exit the screen without recording
Press [RETURN
].
To stop recording partway
Press [
g
].
To show the remaining time
Press [STATUS
].