Filter
Top Products
86
RQT9487
Picture
(All factory default settings are indicated with underlined text.)
Still Mode
Select the type of picture shown when you pause play (➡ 114,
Frames and fi elds).
[Automatic]
[Field] Select if jittering occurs when “Automatic” is
selected. (The picture is coarser.)
[Frame] Select if small text or fi ne patterns cannot be seen
clearly when “Automatic” is selected. (The picture
is clearer and fi ner.)
Seamless Play
Select the play mode between playlist chapter segments and
partially deleted titles.
It is not valid for titles in DR mode or AVCHD videos.
[On] The chapters in playlists are played seamlessly.
This does not work when there are several audio
types included on the playlist and when using
Quick View (PLAY×1.3). Additionally, the
positioning of chapter segments may change
slightly.
[Off] The points where chapters in playlists change are
played accurately, but the picture may freeze for a
moment.
NTSC Video Output
Select how the NTSC image is output.
[NTSC] Output as NTSC.
[PAL60] Convert and output as PAL60. Select this when
connected to the PAL format TV.
Sound
(All factory default settings are indicated with underlined text.)
Dynamic Range Compression
DVD-V
Change the dynamic range for late night viewing.
[On]
[Off]
Downmix
Switch the downmix system for playing back multi-channel
surround sound.
When “Dolby Digital”, “DTS”, “MPEG” or “HE-AAC” is set to
“Bitstream” or “Bitstream (DTS)”, there are no downmix effects
for the audio output.
The audio output will be in “Stereo” during AVCHD playback.
[Stereo] When connected to equipment that does
not support the virtual surround function.
[Surround encoded] When connected to equipment that
supports the virtual surround function
Bilingual Audio Selection
(Only when recording from DV input)
Select whether to record the main or secondary audio type when:
Copying to a DVD-R, DVD-RW (DVD-Video format), +R and
+RW.
“Rec for High Speed Copy” is enabled. (➡ 85)
Recording sound in LPCM (➡ 87 “Audio Mode for XP
Recording”).
[M 1] [M 2]
You cannot select the audio on this unit when recording from an
external source, such as when copying from a video cassette
recorder (except from DV equipment connected to this unit’s DV
input terminal). Select the audio on the other equipment.
When recording from the unit’s DV terminal, select the type of
audio recording from “Audio Mode for DV Input” (➡ 87).
Digital Audio Output
Press [OK] to show the following settings.
PCM Down Conversion
Select how to output audio with a sampling frequency of 96 kHz.
It will be converted to 48 kHz regardless of the setting in
following cases.
The signals have a sampling frequency of over 96 kHz.
The disc has copy protection.
[On] Signals are converted to 48 kHz. (Choose when
the connected equipment cannot process signals
with a sampling frequency of 96 kHz.)
[Off] Signals are output as 96 kHz. (Choose when the
connected equipment can process signals with a
sampling frequency of 96 kHz.)
Changing the unit’s settings