Filter
Top Products
81
RQT9487
Convenient
functions
Deleting all titles—Delete all titles
RAM
Preparation
Release protection (➡ 80, Setting the protection).
After performing steps 1–3 (➡ 80, Common procedures)
1 Press [
e
,
r
] to select “Delete all
titles” and press [OK].
2 Press [
w
,
q
] to select “Yes” and press
[OK].
3 Press [
w
,
q
] to select “Start” and
press [OK].
A message appears when fi nished.
4 Press [OK].
To return to the previous screen
Press [RETURN ].
To exit the screen
Press [EXIT].
Note
Once deleted, the recorded contents are lost and cannot be
restored. Make certain before proceeding.
Still picture data (JPEG) or computer data cannot be deleted.
Delete does not work if one or more titles are protected.
Enabling the unit’s recording
function—Format
RAM
-RW(V)
+RW
-RW(VR)
+R
+R DL
(New disc only)
SD
Preparation
RAM
SD
Release protection (➡ 11, 80, Setting the protection).
Note
Formatting deletes all contents (including computer data),
and they cannot be restored. Check carefully before
proceeding. The contents are deleted when you format a disc or
card even if you have set protection.
After performing steps 1–3 (➡ 80, Common procedures)
1 Press [
e
,
r
] to select, “Format Disc”
or “Format Card” and press [OK].
2 Press [
w
,
q
] to select “Yes” and press
[OK].
3 Press [
w
,
q
] to select “Start” and
press [OK].
A message appears when formatting is fi nished.
Note
Formatting normally takes a few minutes; however, it may
take up to a maximum of 70 minutes (
RAM
).
Do not disconnect the AC mains lead while formatting.
This can render the disc or the card unusable.
4 Press [OK].
Note
When a disc or card has been formatted using this unit, it may not
be possible to use it on any other equipment.
-R
-R DL
CD
Formatting cannot be performed.
-RW(V)
-RW(VR)
You can format DVD-RW only as DVD-Video
format on this unit.
To stop formatting
RAM
Press [RETURN ].
You can cancel formatting if it takes more than 2 minutes. The disc
must be reformatted if you do this.
To return to the previous screen
Press [RETURN
].
To exit the screen
Press [EXIT].