Filter
Top Products
95
RQT9487
Reference
Additional connections
Connecting a television with S VIDEO
terminals
The S VIDEO OUT terminal achieves a more vivid picture than the
VIDEO OUT terminal. (Actual results depend on the television.)
Connect to terminals of the same colour.
Supplied Audio/Video cable can also be used as an alternative for
Audio cable without connecting the video connector (yellow).
This unit’s rear panel
S Video
cable
Audio cable
Television’s rear panel
OUT
O
UTN
PR
P
B
Y
O
NENT
O
OUT
DIGITAL
AUDIO OUT
(PCM/
BITSTREAM)
S VIDEO
IN
AUDIO I N
R L
V IDEO
I N
Connecting a television with
COMPONENT VIDEO terminals
OPTICAL
COAXIAL
OUTO
UT
A
V1 IN
A
VIN
S VIDEOVIDEO
R-AUDIO-L
PR
P
B
Y
10BASE-T/
100BASE-TX
COMPONENT
VIDEO OUT
DIGITAL
AUDIO OUT
(PCM/
BITSTREAM)
R- L
AUDIO IN
R L
P
R
P
B
Y
COMPONENT
VIDEO IN
Television’s rear panel
This unit’s rear
panel
Component
video cable
Audio cable
COMPONENT VIDEO terminals can be used for either interlace or
progressive output (➡ 114) and provide a purer picture than the S
VIDEO OUT terminal.
Connect to terminals of the same colour.
Supplied Audio/Video cable can also be used as an alternative for
Audio cable without connecting the video connector (yellow).
Required setting
“Component Resolution” setting in the Setup menu (➡ 89)
If you have a regular television (CRT: cathode ray tube)
Progressive output may cause some fl ickering, even if it is
progressive compatible. Set “HDMI Video Mode” in the Setup menu
to “Off” and “Component Resolution” in the Setup menu to
“576i/480i” if you are concerned about it (➡ 89). This is the same for
multi system televisions using PAL mode.
CRT
COMPONENT
VIDEO OUT
This unit
COMPONENT
VIDEO IN
Progressive output
DO NOT
Connecting a stereo amplifi er
Connect to terminals of the same colour.
Supplied Audio/Video cable can also be used as an alternative for
Audio cable without connecting the video connector (yellow).
AUDIO I N
R L
OUT
O
UT
A
V1 IN
A
V1 IN
SVIDEOVIDEO
R-AUDIO-L
PR
P
B
Y
COMPONENT
VIDEO OUT
DIGITAL
AUDIO OUT
(PCM/
BITSTREAM)
Amplifi er’s rear panel
Audio cable
This unit’s rear panel
Connecting an amplifi er with a digital
input terminal
Required setting
“Digital Audio Output” in the Setup menu (➡ 86)
When this unit is connected to an amplifi er with an optical digital
audio cable or coaxial cable and connected to a television with an
HDMI cable, you can enjoy the highest quality of audio from the
disc by setting “HDMI Audio Output” to “Off” in the Setup menu
(➡ 89). In this case audio is only output from the amplifi er not the
television.
Before purchasing an optical digital audio cable (not included),
check the terminal shape of the connected equipment.
■ With OPTICAL
You cannot use DTS Digital Surround decoders not suited to DVD.
OPTICAL IN
OPTICAL
COAXIAL
SVIDEOVIDEO
P
B
Y
DIGITAL
AUDIO OUT
(PCM/
BITSTREAM)
Insert the cable so its
shape fi ts correctly into
the terminal.
Amplifi er’s rear panel
Optical digital audio cable
Do not bend sharply when
connecting.
This unit’s rear panel
■ With COAXIAL
OPTICAL
COAXIAL
S VIDEOVIDEO
O
-L
P
B
Y
DIGITAL
AUDIO OUT
(PCM/
BITSTREAM)
COAXIAL IN
Amplifi er’s rear panel
This unit’s rear panel
Coaxial cable
Convenient
functions