100
Note: When "OFF" is selected for "Auto Copy" of "Basic
Setup" on "System", the auto copy function will not work
even though "ON" is selected for this setting.
Select "HDD", "COPY 1" or "COPY 2" for "Auto Copy".
● Video Loss
Perform the settings of event action at a video loss or the
settings of the auto copy function.
The contents to be set are same as the settings for "VMD"
above.
● Terminal/command alarm
Perform the settings of event action at a terminal/command
alarm occurrence or the settings of the auto copy function.
The contents to be set are same as the settings for "VMD"
above.
e [Time Table] Assignment of REC
Prog and Event Prog after setting the
time zone
Create recording timetables for each day of the week,
and assign REC Prog and Event Prog to each
timetable. Up to 6 recording programs can be created.
Do the followings to create timetables.
[Screenshot 1]
Start operation after displayed the timetable window.
z Press the SET button.
[Screenshot 2]
The pop-up setting menu of the timetable for every day of
the week will be displayed.
The cursor will be displayed and will move to "MON"
(Monday).
x Select a day of the week using the arrows button (DC)
and press the [SET] button.
Note: When a signal is supplied from the ALARM/CON-
TROL connector (@4 external recording
changeover), the unit will work with the set timetable
for "EXT."
[Screenshot 3]
The pop-up setting menu of the timetable for the selected
day of the week will be displayed.
c Select "Weekday Time Table" using the arrows button
(DC) and rotate the jog dial to check the checkbox.
EXT.
EXT.
EXT.
EXT.
