Filter
Top Products
Press the ALARM RESET button to can-
cel the error or the warning status.
Initialize the DVD-RAM disk. (Refer to
page XX.) When initialized, all recorded
data will be deleted.
Press the ALARM RESET button to can-
cel the error or the warning status.
Replace the disk with new one.
The DVD-RAM disk is almost full or com-
pletely full.
The CD-R or DVD-R disk is almost full or
completely full.
#-nn% (available
disk size is running
out)
#-FULL (no avail-
able disk size)
Error
Warning
The hard disk is almost full or completely
full.
Press the ALARM RESET button to can-
cel the error or the warning status.
Initialize or replace the hard disk. (Refer
to page XX.) When initialized, all record-
ed data will be deleted. It is recom-
mended to copy the data using an exter-
nal recording device.
POWER Warning The power outage alert signal is sup-
plied from the uninterruptible power sup-
ply system (UPS). Internal processing
will start when the set time for "Shutdown
Time" on the "Basic Setup" menu of
"System" has passed after received the
power outage alert signal. (Refer to
page XX.) When the internal processing
starts, recording will stop and all opera-
tions will be invalid.
Press the ALARM RESET button to can-
cel the warning status. The unit will start
operation automatically after the UPS
starts power supply.
Press the ALARM RESET button to can-
cel the warning status. In case thermal
error occurs frequently, the unit may be
malfunctioning. Contact the dealer.
THERMAL Warning Thermal error of the unit or the extension
unit is detected.
H-METER Press the ALARM RESET button to can-
cel the warning status. Contact the deal-
er to replace the hard disk.
Warning The set time for the HOUR METER has
passed. (Refer to page XX.)
It may be reaching the end of the hard
disk’s lifetime.
R-ERROR
W-ERROR
SMART
ALT-*
Indication
52
ERROR/WARNINGS
• The "error" status
When a fatal error (highly possible to cause the system down) occurred, the ERROR indicator will blink red.
• The "warning" status
When an error (even though it will not cause the system trouble yet, but it is possible to become a fatal error) occurred, the
ERROR indicator will blink orange.
Status Description Solution
Error
Error
Error
Warning
Recorded image had altered.
Playback will be paused.
Failed to read data from the HDD.
The HDD may be malfunctioning.
Failed to write data on the HDD.
The hard disk may be malfunctioning
and may not work correctly.
Press the ALARM RESET button to can-
cel the error status. Press the
PLAY/PAUSE button to resume play-
back.
Press the ALARM RESET button to can-
cel the error status. Contact the dealer
to replace the hard disk.
Press the ALARM RESET button to can-
cel the error status. Contact the dealer
to replace the hard disk.
Press the ALARM RESET button to can-
cel the warning status. Contact the deal-
er to replace the hard disk.