Filter
Top Products
111
● Parity
Select a method to check a transmission error at com-
munication from the following.
NONE: No parity check
EVEN: Even parity
ODD: Odd parity
● Stop Bit
Select a stop bit from the following.
1/2 bit
● Retry Timing
Select a retransmission interval when data reception is
not confirmed from the following.
OFF/100 ms/200 ms/400 ms/1 000 ms
t [NW Setup 1] Basic network settings
Perform the following basic network settings to operate
this unit using a PC via a network such as LAN.
● HTTP Port Number
Specify the HTTP port number to be used to transfer
images from this unit. It is not necessary to change it for
normal use.
● User Authentication
Select ON and OFF whether or not to activate user
authentication at access from a PC to this unit.
When ON is selected, the user authentication window
will be displayed at access from a PC.
The top page will be displayed if the entered user name
and password are registered.
ON: Activates user authentication.
OFF: Does not function.
Note: It is recommended to set to ON for the user
authentication for security.
● Host Authentication
Select ON or OFF whether or not to restrict access by
IP addresses at access from a PC to this unit.
When ON is selected, only PCs with registered IP
address can access this unit
Using the user authentication together will enhance the
network security.
ON: Activates host authentication.
OFF: Does not function.
● Line Speed
The line speed will be displayed.
It is impossible to change the value for this setting.
● Live Video Quality
Image quality level for a live (FQB: high quality) will be
displayed.
It is impossible to change the value for this setting.
y [NW Setup 2] Network connection
settings
Perform the following network connection settings to
operate this unit using a PC via a network such as LAN.
● DHCP
Select ON or OFF whether or not to use the DHCP serv-
er.
When obtaining IP addresses, net mask and a gateway
address from the DHCP server, set to ON.
If not, set to OFF and enter those addresses manually.
ON: Uses the DHCP server.
OFF: Does not use the DHCP server.
● IP Address
Enter an IP address when OFF is selected for "DHCP".
For this unit, enter 4 units of the decimal number (0-
255).
● Subnet Mask
Enter a subnet mask according to the network configu-
ration when OFF is selected for "DHCP".
● Gateway
Enter the gateway address according to the network
configuration when OFF is selected for "DHCP".
● DNS
Select "MANUAL" or "AUTO" to enable searching an IP
address by its host name using DNS. When "OFF" is
selected for "DHCP" (no use of the DHCP server), select
"MANUAL" and enter the domain name and the DNS
server address. If "ON" is selected for "DHCP" (use of
the DHCP server), select "AUTO". When DNS is not
used, select "OFF".
When "MANUAL" is selected for DNS, enter the DNS
server address for "Primary" and "Secondary".
Schedule
System
Com
Switcher
SETUP MENU
LIVE
Maintenance Recording Event
Display
Camera Control
PS.Data Setup
RS485 Setup
RS232C Setup
NW Setup 1
NW Setup 2
NTP Setup
■
DHCP
■
IP Adress
■
Subnet Mask
■
Gateway
■
DNS
Primary
Secondary
■
DDNS
User Name
Password
Access Interval
■
Host Name
■
Domain Name
HD316
localdomain
HD316
localdomain
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
192
255
192
000
000
168
255
168
000
000
000
255
000
000
000
250
000
001
000
000
OFF
MANUAL
OFF
10m
Schedule
System
Com
Switcher
SETUP MENU
LIVE
Maintenance Recording Event
Display
Camera Control
PS.Data Setup
RS485 Setup
RS232C Setup
NW Setup 1
NW Setup 2
NTP Setup
■
DHCP
■
IP Adress
■
Subnet Mask
■
Gateway
■
DNS
Primary
Secondary
■
DDNS
User Name
Password
Access Interval
■
Host Name
■
Domain Name
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
192
255
192
000
000
168
255
168
000
000
000
255
000
000
000
250
000
001
000
000
OFF
MANUAL
OFF
HD316
localdomain
10m