Filter
Top Products
93
Perform the settings for event actions of each event type
(motion detection, video loss, command alarm and terminal
alarm).
q [Event Setup] Settings for the alarm
output duration and the buzzer
duration
Perform the settings for alarm output duration and
buzzer sound duration for each event type (motion
detection, video loss, command alarm and terminal
alarm).
The following are available for alarm output duration.
When OFF is selected, alarm output will not be sup-
plied.
(s: second, m: minute)
OFF: No alarm output is supplied.
1 s - 30 s (in 1 second intervals)
/40 s/50 s/1 m/2 m/3 m/4 m/5 m
EXT: Alarm output will continue until the [ALARM
RESET] button is pressed.
Important:
Alarm output duration cannot be set for video loss.
Signals will be supplied continuously from the camera
error output terminal on the rear panel during the period
when the video signal is lost. (Refer to page xx.)
The following are available for buzzer sound duration.
When OFF is selected, a buzzer will not sound.
(s: second, m: minute)
OFF: The buzzer will not sound.
1 s - 30 s (in 1 second intervals)
/40 s/50 s/1 m/2 m/3 m/4 m/5 m
EXT: The buzzer will continue until the [ALARM RESET]
button is pressed.
w [VMD Setup] Perform the settings for
the motion detection function
Select ON or OFF to determine whether to enable or
disable the motion detection function for each camera
channel.
When ON is selected, perform the settings for the auto
motion detection area for each camera channel. Up to 4
areas can be set for a camera channel for the detection
area. Refer to page xx for further information about the
auto motion detection function.
[Screenshot 1]
Start operation from the camera channel selection menu of
the "VMD Setup" window.
z Rotate the jog dial to select ON for a desired camera
channel to which the motion detection function to be
applied, and press the SET button.
■ [Event] Function for Events
Event Schedule
System
Display
Com
Switcher
SETUP MENU
LIVE
Maintenance Recording
Event Setup
VMD Setup
Alarm Setup
Terminal Setup
SETUP
SETUP
SETUP
■
VMD
■
Video Loss Setup
■
Terminal Command Alarm
Event Schedule
System
Display
Com
Switcher
SETUP MENU
LIVE
Maintenance Recording
Event Setup
VMD Setup
Alarm Setup
Terminal Setup
■
Recording Action
■
External Timer
■
Manual Recording Chanel
■
Embedded REC(Title)
■
Embedded REC(Time & Date)
■
REC Priority
■
Audio Allocation
ON
OFF
All
AUDIO CAMERA
AUDIO 1
AUDIO 2
AUDIO 3
AUDIO 4
CAM 1
CAM 2
CAM 3
CAM 4
PRIORITY REC MODE
1
2
3
Manual REC
Event REC
Scheduleed REC
ON
ON
Event Schedule
System
Display
Com
Switcher
SETUP MENU
LIVE
Maintenance Recording
Event Setup
VMD Setup
Alarm Setup
Terminal Setup
SETUP
SETUP
SETUP
■
VMD
■
Video Loss Setup
■
Terminal/Command Alarm Setup
■
Alarm Output
■
Buzzer
O K CANCEL
10s
10s
Event Schedule
System
Display
Com
Switcher
SETUP MENU
LIVE
Maintenance Recording
Event Setup
VMD Setup
Alarm Setup
Terminal Setup
SETUP
SETUP
SETUP
SETUP
SETUP
SETUP
SETUP
SETUP
SETUP
SETUP
SETUP
SETUP
SETUP
SETUP
SETUP
SETUP
■
CAM1
■
CAM2
■
CAM3
■
CAM4
■
CAM5
■
CAM6
■
CAM7
■
CAM8
■
CAM9
■
CAM10
■
CAM11
■
CAM12
■
CAM13
■
CAM14
■
CAM15
■
CAM16