Filter
Top Products
150
• Check if the HDD has an additional disk space.
• Check if the alarm operation is set to ON.
• Check the schedule settings.
• Check the recording priority settings.
• This unit may neither record nor display setup menus
because the matrix switcher system employs non-inter-
lace signals.
• Check if images have been recorded in the HDD.
• Check the connection of camera you are going to control.
Coaxial communication control is available for cameras
connected to VIDEO IN 1 to 8.
• Check if the camera you are going to control is a combina-
tion camera.
• Check the camera control settings.
• Check the level settings of users logging in. Can the users
control cameras?
• Check the BUSY indicator. When the indicator is lighting,
a higher-priority user is controlling cameras. You cannot
control cameras until the indicator goes out.
• Check the level settings of users logging in. Can the users
record images?
• Check the level settings of users logging in. Can the users
display camera images on monitors?
Check item/Remedy
Problem
Page
Cannot start recording.
Cannot record the SETUP
MENU of a matrix switcher
Cannot playback images.
Cannot control cameras.
Refer to p. xxx.
Refer to p. xxx.
Refer to p. xxx.
Refer to p. xxx.
–
Refer to p. xxx.
–
–
Refer to p. xxx.
Refer to pp. xxx
and xxx.
Refer to pp. xx
and xx.
Refer to pp. xxx
and xxx.
Refer to pp. xxx
and xxx.