Filter
Top Products
91
Perform the settings for the basic recording (REC Setup)
and the emergency recording.
q [REC Setup] Perform the recording
for the basic recording.
Perform the following settings for the basic recording.
• Recording Action
Select ON or OFF to record or not record.
ON: Recording will be performed.
No recording will be performed.
Important:
When OFF is selected for this setting, no recordings will
be performed. Select ON for normal use except when
required to stop recording forcefully such as when trou-
ble occurred with the unit.
• [External Timer]
Select ON or OFF to determine whether to start record-
ing when the power is turned on by the connected
external timer (or the switch) or not.
ON: Manual recording will start automatically after com-
pleting the system check.
OFF: Manual recording will not start automatically after
completing the system check.
Important:
When ON is selected, manual recording will start auto-
matically after completing the system check.
Set to ON except when required to stop recording
forcefully such as when the unit is malfunctioning.
• [Manual Recording Channel]
Select a camera channel for manual recording from the
followings. Refer to page xx for manual recording.
MON2: Images from the camera channel currently dis-
played on the monitor 2 will be recorded.
ALL: Images from all the camera channels will be
recorded.
Important:
Even though "MON2" is selected, images from all the
camera channels will be recorded while the sequential
display or when live image is not displayed on the mon-
itor 2.
When "MON2" is selected, images from a camera chan-
nel for other manual recording that is started later will
be recorded regardless of the operation using the but-
tons on the front panel or via a network.
• [Embedded REC (Title)]
Select ON or OFF to determine whether to record a dis-
played camera title together as a part of the recorded
image or not.
ON: Record camera titles together as a part of the
recorded image.
OFF: Does not record camera titles.
• [Embedded REC (Time & Date)]
Select ON or OFF to determine whether to record dis-
played time and date together or not.
ON: Record time and date together as a part of the
recorded image.
OFF: Does not record time and date.
Important:
It is possible to select ON or OFF to determine whether
to display the camera title or the time and date record-
ed together with the images even though OFF is select-
ed for "Embedded". (Refer to page XX.)
When ON is selected for "Embedded", it is impossible to
hide the camera title and the time and date. (Refer to
page xx.)
• [REC Priority]
Assigns priorities to recording modes. Assigns priorities
1 (highest) - 3 (lowest) to each recording mode.
Refer to page xx for further information about each
recording mode.
• [Audio Allocation]
Allocates audio from the audio input connectors (1 - 4)
on the rear panel of the unit to camera channels.
Allocate audio in accordance with channels of connect-
ed cameras. When OFF is selected, audio will not be
heard.
■ [Recording]
Event Schedule
System
Display
Com
Switcher
SETUP MENU
LIVE
Maintenance Recording
Event Setup
VMD Setup
Alarm Setup
Terminal Setup
■
Recording Action
■
External Timer
■
Manual Recording Chanel
■
Embedded REC(Title)
■
Embedded REC(Time & Date)
■
REC Priority
■
Audio Allocation
ON
OFF
All
AUDIO CAMERA
AUDIO 1
AUDIO 2
AUDIO 3
AUDIO 4
CAM 1
CAM 2
CAM 3
CAM 4
PRIORITY REC MODE
1
2
3
Manual REC
Event REC
Scheduleed REC
ON
ON
Event Schedule
System
Display
Com
Switcher
SETUP MENU
LIVE
Maintenance Recording
Event Setup
VMD Setup
Alarm Setup
Terminal Setup
■
Recording Action
■
External Timer
■
Manual Recording Chanel
■
Embedded REC(Title)
■
Embedded REC(Time & Date)
■
REC Priority
■
Audio Allocation
ON
OFF
All
AUDIO CAMERA
AUDIO 1
AUDIO 2
AUDIO 3
AUDIO 4
CAM 1
CAM 2
CAM 3
CAM 4
PRIORITY REC MODE
1
2
3
Manual REC
Event REC
Scheduleed REC
ON
ON