110
● Baud Rate
Select communication speed for data transmission with
a connected device from the following.
4 800/9 600 /19 200 (bps)
● Control Camera CH
It is possible to assign camera channels to the RS485
ports 1 and 2 as below.
[Screenshot 1]
Start operation from the "RS485 Setup" menu.
z Move the cursor to "Control Camera CH" using the
arrows button ($TD $TC) and press the SET button.
[Screenshot 2]
The "Control Camera CH" pop-up window will be displayed.
x Move the cursor to a desired cell in the "TERM" column
using the arrows button.
[Screenshot 3]
The cursor will move to the selected cell in the "TERM" col-
umn.
c Select a port by rotating the jog dial.
PORT 1: Control through the RS485 port 1.
PORT 2: Control through the RS485 port 2.
Repeat steps 2 and 3 to assign other camera channels
to be controlled through the RS485 ports.
v Move the cursor to "OK" using the arrows button and
press the SET button.
→ Camera channels will be assigned and the "Control
Camera CH" menu will be closed.
Notes:
• When moving the cursor to "CANCEL" in step 4 and
press the SET button, the setting will be canceled
and the "Camera Number Setup" menu will be
closed.
• The assignment of camera channels will not be
applied until the SET button is pressed after moving
the cursor to "OK" in the step 4.
● Data Bit
The data length for communication will be displayed.
It is impossible to change the value for this setting.
● Parity
Methods to check a transmission error at communica-
tion will be displayed.
It is impossible to change the value for this setting.
● Stop Bit
Number of stop bit will be displayed.
It is impossible to change the value for this setting.
r [RS232C Setup] Settings for RS232C
Perform the following settings for RS232C.
● Unit Address(System)
A unit address (System) is a unique number assigning
to each system device. The addresses must be unique
to identify system devices when connecting multiple
system devices.
Numbers, "001"-"099", are to be assigned to the unit
addresses to the system devices.
● Baud Rate
Select communication speed for data transmission with
a connected device from the following.
9 600/19 200/38 400 (bps)
● Data Bit
Select a data length for communication from the follow-
ing.
7/8 bit
