Filter
Top Products
92
Important:
• When a live image from the audio assigned camera
channel is displayed on a single screen on the monitor
2, audio will be heard. When displaying on a multi-
screen, audio will not be heard.
• When images from the audio assigned camera channel
are displayed on a single screen, recorded audio will
be heard. When displaying on a multiscreen, recorded
audio will not be heard.
• Audio will be recorded regardless of displaying on a
single screen or a multi-screen.
w [Emergency REC] Perform the
settings for emergency recording
Perform the settings for emergency recording such as
recording time or recording rate for emergency record-
ing.
Refer to page xx for further information about emer-
gency recording.
• Resolution
Select a recording resolution from the following.
FRAME 3D ON: High resolution (720 x 480), with cam-
era shake compensation
FRAME 3D OFF: High resolution (720 x 480)
FIELD: Standard resolution (720 x 240)
SIF: Low resolution (360 x 240)
• Recording Time
Perform the settings of recording time and recording
action for emergency recording.
The following are available for recording time.
1 s - 10 s (in 1 second intervals)
20 s/30 s
1 m - 10 m (in 1 minute intervals)
20 m/30 m/40 m/50 m/60 m
MANUAL: Recording will continue while the external
switch is being held down.
CONTINUE: Recording will not stop until the [ALARM
RESET] button on the front panel of the unit is
pressed.
• [Recording Rate and Quality]
Perform the settings of recording rate and image quality
for emergency recording.
The following are available for recording rate.
OFF/1 ips/2 ips/3 ips/5 ips/6 ips/7.5 ips/10 ips/15 ips/30
ips/60 ips
Important:
• When OFF is selected for a specified camera channel,
images from a camera channel set to OFF will not be
recorded.
• When "FRAME 3D ON" or "FRAME 3D OFF" is selected,
the total recording rates of CAM 1 - CAM 16 (for WJ-
HD316) must be less than 30 ips.
• When "FIELD" is selected, the total recording rates of
CAM 1 - CAM 16 (for WJ-HD316) must be less than 60
ips.
• When "SIF" is selected, the total recording rates of CAM
1 - CAM 16 (for WJ-HD316) must be less than 120 ips.
• When "FRAME 3D ON", "FRAME 3D OFF" or "SIF" is
selected, it is impossible to select 60 ips.
The following are available for image quality.
SFA/SFB: Top quality (SUPER FINE)
FQA/FQB: High quality (FINE)
NQA/NQB: Standard quality (NORMAL)
EXA/EXB: Low quality (EXTENDED)
**A is suitable for less dynamic images.
**B is suitable for more dynamic images.
• [Auto Copy]
Select ON or OFF to set whether or not to automatically
copy images recorded by emergency recording onto
the copy area on the built-in hard disk or DVD-RAM
disk.
Important:
When OFF is selected for "Auto Copy" on "Basic setup"
of "System", the auto copy function will not work after
emergency recording even though ON is selected for
this setting. Select "HDD", "COPY 1" or "COPY 2" for
"Auto Copy".
Recording Event Schedule
System
Display
Com
SETUP MENU
LIVE
Maintenance
REC Setup
Emergency REC
Switcher
■
Resolution
■
Recording Time
■
Recording Rate and Quality
■
Auto Copy
10s
FIELD
CAM1
RATE QUALITY RATE QUALITY
CAM2
CAM3
CAM4
CAM5
CAM6
CAM7
CAM8
CAM9
CAM10
CAM11
CAM12
CAM13
CAM14
CAM15
CAM16
3ips
3ips
3ips
3ips
3ips
3ips
3ips
3ips
3ips
3ips
3ips
3ips
3ips
3ips
3ips
3ips
VFA
VFA
VFA
VFA
VFA
VFA
VFA
VFA
VFA
VFA
VFA
VFA
VFA
VFA
VFA
VFA
OFF