Filter
Top Products
80
■ How to Use the Alarm Terminals
These terminals are used to connect the alarming devices, such as sensors, door switches, etc.
The pin array of these terminals are as shown below. The connector to be used should be manufactured according to the pin
array.
Pin Array
Pin No.
1
Pin No.
Ch 1 alarm input
Operation
Event action will be performed according
to the settings.
Non-voltage make contact/–100 mA,
5 V pull-up
Alarm signal will be supplied at an event
occurrence
Open collector output/24 V, 100 mA
Event action will be performed according
to the setting.
Non-voltage make contact input/
–100 mA, 5 V pull-up
Alarm signal will be supplied at an event
occurrence
Open collector output/24 V max.,
100 mA
Remarks
2 Ch 2 alarm input
3 Ch 3 alarm input
4 Ch 4 alarm input
5 Ch 5 alarm input
6 Ch 6 alarm input
7 Ch 7 alarm input
8 Ch 8 alarm input
9 Ch 1 alarm output
10 Ch 2 alarm output
11 Ch 3 alarm output
12 Ch 4 alarm output
13, 14 Earth (Grounding)
15 Ch 9 alarm input
16 Ch 10 alarm input
17 Ch 11 alarm input
18 Ch 12 alarm input
19 Ch 13 alarm input
20 Ch 14 alarm input
21 Ch 15 alarm input
22 Ch 16 alarm input
23 Ch 5 alarm output
24 Ch 6 alarm output
25 Ch 7 alarm output
ALARM
q!3
@5
!4