Filter
Top Products
83
SETUP
To operating this unit, it is necessary to set each item of the SETUP MENU in advance.
Perform the settings for each item of the SETUP MENU by displaying the SETUP MENU on the monitor 2.
Settings item are as below.
■ Item list of the SETUP MENU
Maintenance
REC Rate Status Display the recording rate in each recording mode and image quality for each
camera channel in list form.
Disk Info. Display hard disk information such as available disk space of the built-in hard disk
and the connected extension unit.
Version Info. Display version information of the software and the hardware and the MAC
address.
Disk End Mode Set actions to be taken when available space of the built-in hard disk or of the
connected extension unit reaches a specified level.
Disk Capacity Set to display warning when available space of the built-in hard disk of the con-
nected extension unit reaches a specified level.
Data Delete Delete data stored in the hard disk, or format (initialize) DVD-RAM disk connected
to the COPY port.
Maintenance Activate the disk maintenance mode. Enter in this mode when replacing the hard
disk.
Event Log Display the event log. Refer to page xx for further information.
Error Log Display the error log such as a HDD error log.
Access Log Display the time, user name and IP addresses when logging in/out to/from this
unit.
Recording
REC Setup Perform the basic settings for recording.
Emergency REC Perform the settings for emergency recording such as recording time and record-
ing rate.
Event
Event Setup Perform the settings of the alarm output duration and the buzzer sounding when
an event (motion detection, video loss, command/terminal alarm) occurs.
VMD Setup Perform the settings of the motion detection area, sensitivity and the detection
mode for each camera channel.
Alarm Setup Perform the settings of the alarm display duration and alarm suspension duration.
Terminal Setup Specify the alarm terminal polarity.
Schedule
Time Table Create timetables for each day of the week, and assign the recording action pro-
grams and event action programs to the created timetables.
REC Prog Up to 4 recording programs can be created. Perform the settings for the recording
actions for each program such as image quality and recording rate for each cam-
era channel.
EEvent Prog Up to 4 event programs can be created. Perform the settings for each program
such as the event action and the auto copy function for each event type.
Special Days Assign timetables independently as the special days aside from other days.
Setting menu Description Page
n
n