Filter
Top Products
English 66
Using the Tool Menu Options
After you have made changes on this window,
you can apply the new settings to all DVRs
that belong to the same group.
To do so, select the [CHANGES ARE
APPLIED TO GROUP] check box before you
click .
Use the following tips when you define the
download range:
• The download range must have its start
point earlier than its end point. Otherwise,
an error is generated.
• When you set the end point to “00:00”, the
system assumes 00:00 AM. on the next
day.
For example, you can define a 24-hour
download range that spans all video data
recorded on your selected day of the week
by specifying as follows:
• If you specify the same day of the week for
both the recording date of video data to
download and the date on which to perform
the download (i.e., for both the [FROM
WEEK] drop-down list and [WEEK]
drop-down list in the [SCHEDULE] section),
the system will download the video data
recorded one week before.
• When you select “APPT” from the [FROM
WEEK] drop-down list, make sure that the
download range end point is earlier than
the time at which to start the download.
Otherwise, an error is generated.
Valid:
Download start time: 22:30
Download range: 6:00 thru 22:00
Invalid:
Download start time: 18:00
Download range: 6:00 thru 22:00
Applying Changes to All DVRs
in the Same Group
In this context, a “group” means one of
the DVR groups created on the [Register
DVR] window, rather than those created
on the [Edit Tree] window (i.e., the
groups displayed in the tree list). Your
settings will be applied to all DVRs
connected with the cameras that belong
to the group.
Tips on Defining the Download
Range