Sanyo VA-SW8000 DVR User Manual


 
English 82
Initial Set Menu (Required user access level: ID4)
1 IP address configuration mode selector
2 Group name section
3 DVR title section
4 DVR tree list
This tree list displays group nodes (folders)
and DVRs that belong to each group.
When you change or delete the registration
information of a DVR, you can use the tree
list to select the DVR or group.
5 DVR registration list
This list displays the information on the
DVRs that belong to a group selected in the
tree list.
You can also use the registration list to
select the DVR(s) whose registration
information you want to change or delete.
DVR NAME
TYPE (model)
IP ADDR.
MAC ADDR.
6 Up/down buttons
You can move up or down a group or DVR
in the list by selecting the group or DVR
and then clicking this button.
7 Command buttons
:
Saves your change, and updates the
DVRs with the new settings.
Clicking [OK] will bring up the following
dialog.
Select whether or not to reflect the
contents configured in the [Register
DVR] window on the user screen tree list.
Yes:
The current tree list is deleted, and a
new tree list reflecting the new
settings is displayed.
No:
The configured contents are stored,
however, the tree list display remains
the same.
:
Before you click [OK], you can cancel
your changes by clicking this button.
:
Remove the registration information of
DVRs or groups.
Alternatively, you can select a DVR
or group on the tree list and drag
and drop it to a new position.
If a group contains no cameras, it will
be automatically deleted from the tree
list when [OK] is clicked for that group.
Following deletion, a confirmation
message will appear.
The initially configured
“WORKGROUP” cannot be deleted.