Filter
Top Products
11
A/C-7P RO, A/C-7S RO
2.1 Description of Front Panels
C
ONFIGURATION
S
WITCHES
The Configuration Switches are used
to set the output protocol and to
perform the available test and
diagnostic functions. While the A/C-
7P RO models come with only one
bank of switches, the A/C-7S RO
comes with two banks of eight
switches. The left bank is labeled
SW1; the right bank is labeled SW2.
LED
S
The green LED lights indicate the
following:
• Host Line Sync—Communication
lines between the host and the
interface are established.
• Printer Online—The printer is
ready to receive data.
• Data From Host—The A/C-7 RO is
currently processing data
received from the coax host.
• Data From Parallel/Serial—The
A/C-7 RO is currently receiving
data from an attached PC or
LAN. PC download commands
are processed, other data is
transmitted to the printer.
• Power—The A/C-7 RO is
powered on.
On/Off Switch—The On/Off switch
is used to power on or power off the
A/C-7 RO. Use this switch when
asked to cycle power.
2.2 About This User’s Guide
Since this user’s guide covers two
A/C-7 RO models, including A/C-7P
RO and A/C-7S RO.
2.3 Unpacking
Check the packaging for water or
physical damage, and notify the
carrier immediately if there is any
damage.
Keep the original packaging in
case you need to move or ship the
A/C-7 RO.