Filter
Top Products
53
A/C-7P RO, A/C-7S RO
COMMAND 77: SERIAL-IN WORD
LENGTH
Selects the Word Length of data
received at the serial-in port. A new
setting will not be effective
immediately. To activate the new
setting, cycle power on the interface.
VALUE DESCRIPTION
7 7 Bits
*8 8 Bits
Example: &%Z77,7 sets the word
length to 7 bits
COMMAND 78: SERIAL-IN STOP
BITS
Selects the number of Stop Bits of a
data stream received at the serial-in
port. A new setting will not be
effective immediately. To activate
the new setting, cycle power on the
interface.
VALUE DESCRIPTION
*1 1 Bit
2 2 Bits
Example: &%Z78,2 sets the number
of Stop Bits to 2
COMMAND 79: SERIAL-IN
PARITY
Selects the Parity of a data stream
received at the serial-in port. A new
setting will not be effective
immediately. To activate the new
setting, cycle power on the interface.
VALUE DESCRIPTION
*0 None
1Odd
2 Even
Example: &%Z79,2 sets the parity to
even.
COMMAND 84: 6 LPI STRING
Used when operating in Generic
output protocol. Defines the 6 LPI
string the interface sends to the
printer when the host sends a 6 LPI
command.
VALUE DESCRIPTION
1(max. 25 Defines the 6 LPI
bytes of string
ASCII hex
code)
1() Deletes the 6 LPI
string
*Factory-default setting.