Filter
Top Products
38
A/C-7P RO, A/C-7S RO
COMMAND 17: VALID FF
FOLLOWED BY DATA
Sets the printer in accordance with
the RPQ installed in the control
unit.
VALUE DESCRIPTION
*0 Second print
position of first line
on next form
1 First print position
(PP) of first line on
next form
NOTES
For the Value 1 selection, the
RPQ would be:
IBM 3268 RPQ SC9503
IBM 3287 RPQ N/A
IBM 4214 OPT 16=2
Available only in LU3 (non-
SCS) operation.
Example: &%Z17,1 performs first
PP of first line on next form as the
next PP when a valid FF is not
positioned at the end of an IBM
print buffer.
COMMAND 18: VALID FF AT END
OF PRINT BUFFER
Sets the printer in accordance with
the RPQ installed in the control unit
VALUE DESCRIPTION
0 First PP of second
line on next form
*1 First PP of first line
on next form
NOTES
To use this function, the
RPQ should be:
IBM 3268 RPQ SC9504
IBM 3287 RPQ SC3749
IBM 4214 OPT 17=2
Available only in LU3 (non-
SCS) operation.
Example: &%Z18,1 performs first
PP of first line on next form as the
next PP when a valid FF is received
at the end of an IBM print buffer.
COMMAND 19: FF VALID
LOCATION
Sets the printer in accordance with
the RPQ installed in the control
unit.
VALUE DESCRIPTION
*0 FF is valid only at
the first print
position or at
position MPP+1.
1 FF is valid
anywhere it occurs.
NOTES
To use this function, the
RPQ should be:
IBM 3268 RPQ SC9506
IBM 3287 RPQ SC3739
IBM 4214 OPT 19=1
Available only in LU3 (non-
SCS) operation.
Example: &%Z19,1 makes FF valid
anywhere it occurs.
*Factory-default setting.