Filter
Top Products
55
A/C-7P RO, A/C-7S RO
COMMAND 87: 15 CPI STRING
Used when operating in Generic
output protocol. Defines the 15 CPI
string the interface sends to the
printer when the host sends a 15 CPI
command.
VALUE DESCRIPTION
1(max. 25 Defines the 15 CPI
bytes of string
ASCII hex
code)
1() Deletes the 15 CPI
string
Example: &%Z87,1(1B 67) stores
the 10 CPI command for an Epson
LQ-2500 printer (hex value 1B 67)
as the 15 CPI string.
COMMAND 88: 12 CPI STRING
Used when operating in Generic
output protocol. Defines the 12 CPI
string the interface sends to the
printer when the host sends a 12 CPI
command.
VALUE DESCRIPTION
1(max. 25 Defines the 12 CPI
bytes of string
ASCII hex
code)
1() Deletes the 12 CPI
string
Example: &%Z88,1(1B 4D) stores
the 10 CPI command for an Epson
LQ-2500 printer (hex value 1B 4D)
as the 12 CPI string.
COMMAND 89: 16.7 CPI STRING
Used when operating in Generic
output protocol. Defines the 16.7
CPI string the interface sends to the
printer when the host sends a 16.7
CPI command.
VALUE DESCRIPTION
1(max. 25 Defines the 16.7
bytes of CPI string
ASCII hex
code)
1() Deletes the 16.7
CPI string
Example: &%Z89,1(1B 10) stores
the 16.7 CPI command for an Epson
LQ-2500 printer (hex value 1B 10)
as the 16.7 CPI string.
COMMAND 98: RESTORE
DEFAULTS OR PRINT
CONFIGURATION
Restores the factory default
configuration selections, prints out a
copy of the active configuration
selections, or restores the permanent
memory selections to the active
setup status.
VALUE DESCRIPTION
0 Restores the factory
setup
1 Prints out the active
setup selections
2 Restores the setup
selections stored in
the permanent
memory to active
status