Filter
Top Products
21
A/C-7P RO, A/C-7S RO
4.2 Configuration Switch Settings
Use the A/C-7 RO’s configuration
switches to select the output
protocol and to perform the
available test and diagnostic
functions. Use a pointed object, such
as a ball-point pen, to change the
switch settings.
When operating, the A/C-7 RO
will only recognize EBCDIC Hex
Dump and ASCII Dump settings. All
other settings are read only at power-
up. Whenever you change one of
these settings, remember to cycle the
power to activate them.
NOTE
If an invalid switch setting is
encountered at power-up, all
LED lights will blink and the
A/C-7 RO cannot operate.