Filter
Top Products
50
A/C-7P RO, A/C-7S RO
3 User Defined
mode. Documents
are printed using
the fonts and
orientation that the
user specifies
through use of the
&% font ID
commands.
Example: &%Z62,3 specifies that
the document is printed as
formatted when the primary paper
tray is specified as the paper source.
COMMAND 63: ALTERNATE
PAPER TRAY ORIENTATION
HP PCL only. This command
functions identically to Command 62
except it controls the orientation for
printing that specifies the alternate
tray for the paper source.
Even if the printer does not have
an alternate paper tray, the SCS
(LU1) host specifies the alternate
tray, and the interface prints the
document in accordance with the
selection in Command 63.
Values are the same as Command
62 except substitute “alternate tray”
for “primary tray” in the
descriptions.
NOTE
The value 3 is an excellent
choice when COR is not
required, since the user can
decide the fonts and
orientation he desires by
using &% font ID commands.
Example: &%Z63,2 specifies that
landscape orientation will be used
for all printing in which the SCS
(LU1) PPM code specifies the
alternate paper tray be used.
COMMAND 64: MANUAL FEED
TRAY ORIENTATION
HP PCL only. This command
functions identically to Command 62
except it controls the orientation for
printing when the PPM Command
specifies the manual feed tray for the
paper source.
Values are the same as Command
62 except substitute “manual feed
tray” in place of “primary tray” in the
descriptions.
NOTE
The laser printer will, upon
receipt of the manual feed
tray command, not print until
paper is placed into the
manual feed slot. This allows
the user to insert special
forms, letter head, or colored
paper into the manual feed
slot.
*Factory-default setting.