Filter
Top Products
54
A/C-7P RO, A/C-7S RO
NOTES
This string represents the
printer-specific command to
set the printer to 6 LPI.
Consult your printer’s
manual for the appropriate
hex value representing the 6
LPI command.
Example: &%Z84,1(1B 32) stores
the 6 LPI command for an Epson
LQ-2500 printer (hex value 1B 32)
as the 6 LPI string.
COMMAND 85: 8 LPI STRING
Used when operating in Generic
output protocol. Defines the 8 LPI
string the interface sends to the
printer when the host sends an 8 LPI
command.
VALUE DESCRIPTION
1(max. 25 Defines the 8 LPI
bytes of string
ASCII hex
code)
1() Deletes the 8 LPI
string
NOTES
This string represents the
printer-specific command to
set the printer to 8 LPI.
Consult your printer’s
manual for the appropriate
hex value representing the 8
LPI command.
Example: &%Z85,1(1B 30) stores
the 8 LPI command for an Epson
LQ-2500 printer (hex value 1B 30)
as the 8 LPI string.
COMMAND 86: 10 CPI STRING
Used when operating in Generic
output protocol. Defines the 10 CPI
string the interface sends to the
printer when the host sends a 10 CPI
command.
VALUE DESCRIPTION
1(max. 25 Defines the 10 CPI
bytes of string
ASCII hex
code)
1() Deletes the 10 CPI
string
Example: &%Z86,1(1B 50) stores
the 10 CPI command for an Epson
LQ-2500 printer (hex value 1B 50)
as the 10 CPI string.
*Factory-default setting.