Filter
Top Products
15
A/C-7P RO, A/C-7S RO
9.With the A/C-7S RO powered
off, attach the coax cable from
the host to the A/C-7S RO’s
BNC connector.
NOTE
Whenever the printer is
powered off, the A/C-7S RO
must also be powered off to
ensure they stay in sync with
each other.
The self-test printouts in Figures 3-
1 and 3-2 show the default settings
for the different A/C-7 RO models.
The printout you obtain may differ
from the samples, since only the
configuration parameters associated
with the active output protocol (e.g.
HP PCL, IBM PPDS, etc.) are
printed. The second page of the self-
test printout is the same for both
A/C-7 RO models.
P
OWER
-O
N
/O
FF
S
EQUENCE
Follow the power-on and -off
sequences exactly, or the print
output may be garbled.
To power on:
1.Turn on the printer.
2.Turn on the A/C-7 RO.
To power off:
1.Turn off the A/C-7 RO.
2.Turn off the printer.