Filter
Top Products
33
A/C-7P RO, A/C-7S RO
COMMAND 4: LINE SPACING
Selects default Line Spacing.
VALUE DESCRIPTION
*1 Single Space
2 Double Space
Example: &%Z4,2 sets the printer to
double space default.
COMMAND 5: FORM LENGTH
Selects default Form Length (MPL =
Maximum Print Lines).
VALUE DESCRIPTION
000 No form length
control
001 Set form length in
to number of lines
255
*066 Factory Default
NOTE
The 000 value enables the
front panel selection on the
printer to control the form
length when Command 25 is
set to value 0.
Example: &%Z5,70 sets form length
to 70 lines for A4 paper.
COMMAND 6: MAXIMUM PRINT
POSITION
Selects current and default
Maximum Print Position, the
maximum number of characters
which can be printed on each line.
VALUE DESCRIPTION
000 Infinite line length
001 Set MPP in number
to of characters
254
*80 Factory Default
NOTES
Normal values are 80, 132, or
198 characters. This default
emulates the front-panel
selection on an HP printer.
MPP and the current position
will not be changed by
changes in CPI.
The infinite line length will
place no limits on the
number of characters that
can be sent to the printer on
a single line.
Example: &%Z6,63 sets MPP to 63
characters.
*Factory-default setting.