INITiate
The INITiate subsystem changes the trigger state from idle to wait-for-trigger.
Subsystem Syntax INITiate
[:IMMediate]
INITiate[:IMMediate]
Changes the trigger system from the idle state to the wait-for-trigger state.
Parameters None.
Comments • If this command is received and the trigger system is not idle, an error is
generated.
• If this command is received and no channels are waiting for a trigger event, an
error is generated.
• Triggering is described in more detail on page 54.
• Related Commands: TRIGger:SOURce, SOURcen:VOLTage:TRIGgered,
SOURcen:CURRent:TRIGgered, ABORt
INITiate
80 HP E1418A SCPI Command Reference Chapter 3